S52 finally!

[parkerbink]

I got a new Dragy & I got a mount.









Ordered a teal mount for the BMW.

[parkerbink]

Got the car, there was a miscommunication, they didn't install them.




In! it was easy!


Alignment is tough, get the front right & it's too far back, back right too far forward, I compromised.

[parkerbink]

Normal grill badges are huge for Z3 grills. I hail maried and got some pins, most were too small. This one is ok. I like it but am on the fence.

[parkerbink]

I removed the "badge" The car is 99.9% done, I have an annoying rear suspension noise.

https://vimeo.com/955561221?share=copy

I have looked 5+x can't find anything loose, all bushings were slathered in silicon grease.

I ordered this to localize the noise.

https://www.amazon.com/dp/B0CCPBF9HJ?psc=1&ref=ppx_yo2ov_dt_b_product_details

[parkerbink]

Noise detector came.

[parkerbink]

1 is at the differential side of the driver lower control arm pivot, 2 at the outside, 3 at the shock. 4 is at the inner side of the pass lower control arm, 5 is at the differential side of the passenger lower control arm.

It's helpful, I thought the bulk was on the passenger side.

https://vimeo.com/958550229?share=copy

[parkerbink]

I drove the BMW in 110 degrees to the pool store a mile away, temp elevated slightly so I opened the hood & the lever was super hot because the filter for the SC oil landed right under it & while I was there.....

[Northern]

That sound thing looks pretty damn slick. Engine bay isn't half bad either haha

[parkerbink]

I was skeptical, but the darn thing worked. Worth every penny (70)

[f2892704]

Great job

[parkerbink]

Thanks

Took a drive, wish it wasn't so damn hot.

https://vimeo.com/959631759?share=copy

[parkerbink]

Went with a standalone ECU after numerous MS41 tuning disasters, has e85 & water/meth is going in.

[82eye]

such a nice missile