How are they compared to the RS3s?
Strict budget, slow restoration. *Now with moar budget*
Collapse
X
-
-
Awesome :D
225 RS3s were pretty nuts, these are only 205s (half an inch less tread in reality) but are another notch up. You need to run some serious pressure in 'em (I'm at 40psi cold right now) but like I said, my suspension feels too soft now. With the RS3s it was just about right.paint sucksComment
-
The only thing I liked more about the RS-3's was how they lasted in the long run. Love the new setup, enjoy the sticky rubber!Awesome :D
225 RS3s were pretty nuts, these are only 205s (half an inch less tread in reality) but are another notch up. You need to run some serious pressure in 'em (I'm at 40psi cold right now) but like I said, my suspension feels too soft now. With the RS3s it was just about right.Comment
-
Comment
-
Haha reminds me when I swtiched from all weather tread to my Dunlop Z1 on stock suspension. All I can say is it was scary. Will be interested in how many miles those tire last you as I would like to switch to some R888 as my next set of tires.sigpicComment
-
'Mirin the exhaust. I need something that I can disassemble.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Originally posted by Wh33lhopVANOS: sometimes you just need to go full retard.Comment
-
dude. your a fucking boss! this reminds me of when i got my first car when i was 15 (a 92 3000gt vr-4) did turbos, clutch, coil-overs, and full 3 in exhaust in my dirt driveway workin day and night. my g/f at the time dumped me cause i spent all my time in the dirt wrenching :)
now im spoiled with a shop to work in, and am generally lazy compared to you.
ppl like you are why e30 owners fuckin rule."In God we trust. All others must bring data." -W. E. Deming
/// 1987 325is /// Project Thread
Past: 87 is, 88ix, 88 i, 87 ic, 89 ix, 17 others.Comment
-
Zorst is stock actually, adapted to OBD2 manifolds.
I'd be working in a shop too if I was able to. I'm not. That's all. :pdude. your a fucking boss! this reminds me of when i got my first car when i was 15 (a 92 3000gt vr-4) did turbos, clutch, coil-overs, and full 3 in exhaust in my dirt driveway workin day and night. my g/f at the time dumped me cause i spent all my time in the dirt wrenching :)
now im spoiled with a shop to work in, and am generally lazy compared to you.
Recent ex wasn't a huge fan of the car, one before that liked that I worked on it. Fuck 'em, I don't really care--this will always be a huge part of who I am, if a girl left me for it I wouldn't bat an eyelash.
Shit, that's a compliment if I've ever seen one. Thanks mang.ppl like you are why e30 owners fuckin rule.paint sucksComment
-
Comment
-
Thanks bud, it puts a smile on my face every time I drive it. Oh and it's 1.2G sustained actually, but I did technically peak 1.43 :p

I'll have to do some more logging when I have an actual alignment and the tires are warm.
Anyway: oh herro

Out with the old

Here's the new (quiet) diff

Knocking the diff bushing out of the 4.10 was a matter of PBblaster and a BFH

Filling the new diff

Aand in with the new

Here's where my driveshaft was rubbing

Off with the old CSB

On with the new

Last pic before we wrapped it up

Now my driveshaft is vibrating when I get on it hard, due to the angle. I think I am going to get new u-joints put in because they are binding and causing the bad vibes, so to speak.paint sucksComment
-
How do you like the 4.10? I'm going from a 4.10 to a 3.73, it seems to me that the 4.10 is a bit too short for my liking.Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.
Originally posted by Wh33lhopVANOS: sometimes you just need to go full retard.Comment






Comment