A look at things to come

[nando]

it's just a check valve, installed as part of a recall, that keeps hot coolant from spraying on your legs if the heater core bursts.

[Jand3rson]

I've talked to 5 - 6 different people that have done 24V swaps, not one of them said they used or were told to use this safety valve thing you're talking about, either.

[Jparkr]

Its not like a flat or gloss paint, its a rough paint...I could not seem to decide on a spary paint so i got this



Im promise Im not posting to post, added loop connectors and wired alternator

added the safety valve for coolant, which Janderson will be doing, As I instructed him...

took e34 wire holder off, and wrapped the harness with tape, will use cloth tape on it tomorrow.

Bondo on, sanding tomorrow, primer tomorrow. Pleased its been 60 degrees outside

So, you're doing white bed liner? How unoriginal of you...

What is that intake boot valve you ordered, and which coolant safety valve are you talking about?

Thank god he instructed you to get that valve. Who knows what could have happened.


And yes, you do post just to post. You have 3,800 posts since June 09. AND I already deleted 3 thousand posts about a year ago.

[White325is]

Pics or we dont believe it.

[Matt-B]

passenger side is shaved and awaiting primer, bondo worked fine.


finishing drivers side tomorrow

[Matt-B]

huh?

You get my PM?

Yea master was corroded a bit from rusty Wisconsin

What is that intake boot valve you ordered, and which coolant safety valve are you talking about?

the safety valve protects your heater core from exploding, it was a BMW factory recall, my m42 had it,

and the valve, is the intake boot hole to oil dipstick

[Wishno87]

Matt why did you paint the master cyl? If you get so much as one drop of brake fluid on it that stuff will just melt off

It would probably look just as nice if you cleaned it up a bit.

[Jand3rson]

What is that intake boot valve you ordered, and which coolant safety valve are you talking about?

[Wishno87]

Please its been 6

huh?

You get my PM?

[Matt-B]

Its not like a flat or gloss paint, its a rough paint...I could not seem to decide on a spary paint so i got this



Im promise Im not posting to post, added loop connectors and wired alternator

added the safety valve for coolant, which Janderson will be doing, As I instructed him...

took e34 wire holder off, and wrapped the harness with tape, will use cloth tape on it tomorrow.

Bondo on, sanding tomorrow, primer tomorrow. Pleased its been 60 degrees outside

[Jand3rson]

+1 it Is going to be nasty. Matt remember when we painted your old car flat white?

There's a kid here that painted his E30 flat white, and after a couple of weeks, it looked like absolute shit, nothing that can be done about it.

[Wishno87]

Flat white in the engine bay? Man, every time anything even remotely dirty touches it, you're going to get a mark that probably won't rub off...

+1 it Is going to be nasty. Matt remember when we painted your old car flat white?

[Jand3rson]

bondo on most seemd

got primer and ordered the paint for engine bay, its white but not glossy

Flat white in the engine bay? Man, every time anything even remotely dirty touches it, you're going to get a mark that probably won't rub off...

[Matt-B]

bondo on most seemd

got primer and ordered the paint for engine bay, its white but not glossy

[Matt-B]

cut all brackets off in engine bay, will probably remove ABS, more insulation tomorrow


I stripped 1 brake line, so Im going to get brake line tools as well