Kamotors E30-Turbo to ITB M20

[318aye]

Oh wow, I didn't have to cut anything on the box or the hood. :???: :???:

[kamotors]

I didn't measure but just went until it just cleared booster by about 2-3mm. I have condor mounts so hopefully it's enough clearance. It put it high enough that had to cut out a good chunk of the hood skeleton. Even after clearance the metal backing plate with a notch around booster and flattening the bottom of the number 6 velocity stack to get it installed .

Sent from my SM-N920T using Tapatalk

[318aye]

About an 1/8th inch maybe a little bit more

Sent from my SM-N920T using Tapatalk

I ninja edited, there was lots of squish when I tightened it. Just looking for a sanity check.

[kamotors]

How much did you end up spacing it? I ended up with .125" on the driver side mount.

About an 1/8th inch maybe a little bit more

Sent from my SM-N920T using Tapatalk

[318aye]

How much did you end up spacing it? I ended up with .25" on the driver side mount.

[kamotors]

Tough balance between clearing booster or hitting hood, but nothing a spacer, dremel and hammer couldnt fix....



Sent from my SM-N920T using Tapatalk

[kamotors]

Had a great time at Bimmerfest, only met a few of you but here is the video I put together.

https://youtu.be/UY29WA7_Rog

[kamotors]

For those interested I'm making videos of my Bimmerfest trip. Part 1 is uploaded.(re upload)

https://youtu.be/fAlmrnhMWc0

[kamotors]

Well they are fixing the ACS valance for free but what a hack job. Had to uncover all there hidden screws. They hit something pretty good



Sent from my SM-N920T using Tapatalk

[bradnic]

If you used a credit card file a disputed and withhold payment. As long as you have pics before delivery the shop is screwed and has to address the problem to your satisfaction. Sometimes it's an employee that screws up with the owner unaware. You never know, just get your evidence straight and force the issue, preferably with a neutral party as intermediary

[bangn]

jesus.. hope they didnt just repaint that lip.

thats a really dodgy repair.. SLAPPED together job

[kamotors]

I always take photos, so yes these were taken right as it was installed, clearly no damage to either valance or ACS lip


Sent from my SM-N920T using Tapatalk

[2mAn]

do you have any proof of what it looked like before? You might be SOL. I would for sure talk to whoever is in charge, but I wouldnt expect much to happen. sucks

[kamotors]

Guys need some advice, we got my brothers car back from paint and we noticed the front spoiler was crooked but today we decided to fix it thinking the body shop was just lazy but we discovered they hit something with car, destroyed the oem valance and then repaired and glued the ACS front lip on crooked and put screws all over it then bondo's and painted over it. What can I do? They clearly are at fault but how do I prove it and get them to fix it?



Sent from my SM-N920T using Tapatalk

[kamotors]

Got the 7 ready for bimmerfest, I'll be leaving on friday, hopefully can meet some of you.