Kamotors E30-Turbo to ITB M20

[kamotors]

SO found my lower fuel line to the fuel rail had cracked and was leaking gas which might explain my random cut out I was having out of no where, started the car up and seem to of broke or tweaked an engine mount. engine is now sitting around 3/4" further forward towards radiator and have quite a bit of vibration. Have some new street poly mounts coming now.

[pacmanE30]

any vids of your auto-x extravaganza?

[kamotors]

any vids of your auto-x extravaganza?

just my second run of me learning the track, I knocked 2 seconds off by the end of the day.
auto-x videohttp://www.youtube.com/watch?v=YxAf2...ature=youtu.be

[pacmanE30]

nice vid! copilots a little shaky lol.

[kamotors]

new slick fender flares done:)

[kamotors]

hmmm...

[Pootis]

Ha mine did the same thing looks like you will be giving condor a call

[kamotors]

already have some IE mounts on the way

[silence]

already have some IE mounts on the way

Let me know when they break ;)

[ak-]

2 friends melted their passenger side IE mounts because they didn't heat shield them Kammy. Just a heads up!

[kamotors]

old motor mounts were a bit dead, motor sits much better now and the wastegate tube got an additional .5" of clearance from the body.

[kamotors]

Still at 18psi and the motor keeps taking more and more timing, its the most aggressive timing map I've run and a bit more aggressive than the most aggressive map I could find in the timing map thread for the in boost part. Not sure how much more I can throw at it but its making good power.AFR has been fixed since this pull so I should be making even more power now.

[LowR3V'in]

Real dyno anytime in the future?

[kamotors]

I'll be looking into it. 60-100mph appears to be less than 5seconds now.

[kamotors]

oh and with the bit of extra fuel and methanol things stayed cool and my intake temps were 5-10degrees below ambient!