FORGED FULLY 🐬 grey S50,shaved, KW, brembos, garret g30/770 fr&rear 5 lug,

[e30m20TurbO7]

So I found out what was , wrong with my motor , and it has nothing to do with the compression , or the rings , I've got a few options , il show everyone what my plan is as soon as I got my car in a garage that's heated

so you ever figure out what was wrong with your motor?

[AnimalE30]

So I found out what was , wrong with my motor , and it has nothing to do with the compression , or the rings , I've got a few options , il show everyone what my plan is as soon as I got my car in a garage that's heated

Soooo what happened?

[Cronopoulos]

The suspense!

[e30m20TurbO7]

So I finally found a place to rent out to store / work on my car for 125$ a month 2 miles from my house , it's on a persons property so there are no hour limitations ,
I've got some major plans for her

[e30m20TurbO7]

I decided to put a days worth of work in .
I stayed focused and knew what I was doing for once in my life.

[e30m20TurbO7]

Who likes m20 carnage!
Problem knocking bearing was 5 and that's the first bearing I show
rods 3 and 4 were spun





Bearing 3 rod end cap


Do you see what I see



Tomorrow will be fun

[F34R]

I remember that engine block color, this is your second rebuild? 3rd time is always the charm.

Post# 52 learn and do it right this time.

http://www.r3vlimited.com/board/showthread.php?t=243359&page=2

[e30rapidic]

did your oil pump bolts work themselves loose?

[e30m20TurbO7]

All my oil pump bolts were tight , it's cool tho

did your oil pump bolts work themselves loose?

You're right 3rd time is the charm , I'm not even worried about it , I think I spun bearings due to tolerances not being there or possibly the part manufacturer sent me the wrong ones . I got a spare crank that il have checked out , some of my rods look a little scored . Keep on truckin
At least il make it to mfest this year

I remember that engine block color, this is your second rebuild? 3rd time is always the charm.

Post# 52 learn and do it right this time.
http://www.r3vlimited.com/board/show...=243359&page=2

[e30m20TurbO7]

The last start up before tear down

http://i65.photobucket.com/albums/h210/adamslayerxyz/0E08083D-C168-4686-AEE8-088349A23078-299-00000064BBD117A4.mp4

Thought everyone might want to see

[e30m20TurbO7]

Block got torn down , I took it to the car wash to degrease is with tire and engine cleaner then pressure washed the oil galleries and then took it back to the shop and put oil in all the cylinders to keep from Rusting













Another days worth of work

[Cronopoulos]

Nice work man!

[kid325e]

Are you running a B25 oil filter housing?

Check it out buddy! Loved the block color so much...



Sent from my LG-P999 using Tapatalk 2

[kid325e]

Sent from my LG-P999 using Tapatalk 2

[e30m20TurbO7]

yea i am running one but i have the oil cooler lines capped off till i ethier buy new oil cooler hoses , or get the hoses crimped because they leak , block looks good man

[ATTACH]65604[/ATTACH]

Sent from my LG-P999 using Tapatalk 2

spare crank was dropped off at the machine shop .
My autohausaz bill is 274.00
my blunttech bill is 120.46
machine shop fees 35.00 for micro polish cleaning and measuring
summit o-ring tool 60.00
The list
connecting rod bolts 70.00
fuel filter 9.00
selector shaft seal 3.76
exhaust nuts 5.61
goetze headgasket 33.21
waterpump gasket 1.00
timing cover gasket 1.12
shift linkage clip 1.42
oil pan gasket 3.61
mahle oil filter 4.33
M/T shifter bushing 6.96
main bearing set 92.21
plastic spoiler nut 5.70
input saft seal 4.97
exhaust hanger 2.67
exhaust donut 1.56
manifold gasket 19.00
downpipe gasket 8.32
motor mount 8.31
cylinder head bolts 17.53
rear main seal 8.89
temp sensor 6.98
rod bearings 42.76
clutch pedal 1.85
brake pedal 2.96
assembly lube 6.08
bmw coolant 24.94
coolant drain plug 1.61