Originally posted by 87e30
View Post
Here are the best tips I can give. I don't typically give this info out, so don't spread it around.
Aperture set to about f/8
Focus set to AI Servo (for Canons). It's the focus that automatically refocuses for every shot.
Burst mode burst mode burst mode
I usually use about 1/35 for shutter speed, but the faster it is the less chance of camera shake you'll have
I brace myself with my legs and cradle the camera with both hands. I use my right hand thumb to hit the shutter release button. Obviously we never go very fast, 45mph is the max I ever shoot at. Otherwise I might lose a knuckle on a bump. For obvious reasons, SUVs make poor cars to shoot from.
Make sure you have stuff near your car that you're driving by, that's what will give the speed effect. The wheels and road will imply movement, but without trees or something close by the background will be frozen.
Lighting is key (isn't it always?) I get my best results from strong, indirect light and I only shoot rollers during the golden hour (or just before).
Too much light will make the photo look harsh, not enough will make everything too soft. It's a fine balance and it's truly a crap shoot with rolling shots. The hard part isn't getting a little bit of the car in focus, it's getting the entire car in focus.
Here's some examples for comparison. Look over the entire car to see what I mean.
Good lighting (light source is approximately to the left of the house)

Poor lighting (direct light, light source is beside the car on the drivers side)

Poor lighting (not enough light, right side of car is soft)

Comment