Announcement

Collapse
No announcement yet.

Flame suit on- Anybody track or auto-x a low car?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #16
    Originally posted by Wh33lhop View Post
    We are talking "lifestyle" levels of low here.
    bro don't be a hat3r bro

    or else my boys will softly tackle you and tickle you to death while whispering nice things in your ear
    1989 Hooptie 325iS Build Thread
    1989 Zinnoberrot M3 Build Thread

    Comment


      #17
      Originally posted by JinormusJ View Post
      I have no idea what people mean by "low" in this thread...

      I thought the point of getting performance out of an e30 was lowering it?

      Do you mean like Stanced and Cambered low?
      It's going to be pretty damn low, but I'm sure I could somehow etch out markings on the adjusters for my street wheels and for the 'race' tires. I'm probably exaggerating how low the car will be, or more like over estimating how much it will affect the car. It will be a little bit lower than Northern's car, so if I can jam some decent size sticky rubber under it I'd probably be just fine.
      For all things 24v, check out Markert Motorworks!
      Originally posted by mbonanni
      I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

      I am a pursit now.

      Comment


        #18
        Originally posted by nando View Post
        ^ can you read??
        You can be "Stanced" without being absurdly low

        Just wanted to know the distinction if were talking about low or slammed

        Comment


          #19
          Originally posted by JinormusJ View Post
          You can be "Stanced" without being absurdly low

          Just wanted to know the distinction if were talking about low or slammed
          To be fair yeah this is true, it's not obscenely low, just fairly aggressive wheel fitment. I think I was just too worried about it. I'm gonna get the car geared up and hit a couple events this year to get back into it and assess where I want to go with the car once I'm done college.
          For all things 24v, check out Markert Motorworks!
          Originally posted by mbonanni
          I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

          I am a pursit now.

          Comment


            #20
            You can really screw the roll center up if you go too low.
            sigpic

            Comment


              #21
              How low are you thinking?

              I rebuilt my PRO3 suspension (uses GE setup and I sectioned the housing 2.5" shorter and iX struts) and have it on the car for this weekend's Rose Cup races with SCCA. The "highest" the car sits with the taller 225/50/15 tires is 5.25 inches measured at the pinch weld. Our class minimum is 5", and if you are not close to this, you are probably not in the top 10.

              You want to be low when running Wheel-to-wheel..

              Autocross, I would run as low as you can without bottoming the skid plate (you have one right..) Doesn't apply to all classes, but if you are running coilovers, you are probably in a class that it would benefit you to be lower.
              1991 325i MT2 Touring (JDM bro)
              2016 Ford Flex
              2011 Audi A3 - wife's other German car

              Comment


                #22
                Well, there's functional track car low like your sig pic, and "i'm so original, look at my highly processed and filtered pictures of my piece of shit car with rubber band tires on gaudy oversized wheels worth an order of magnitude more than my horribly-aligned car #hatespeedbumps #lowlyfestyle #nofatchix #Imafuckinmoron #lookatmeplease" low
                2017 Chevrolet SS, 6MT
                95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
                98 M3/4/5 (stock)

                Comment


                  #23
                  Originally posted by Bimmerman325i View Post
                  Well, there's functional track car low like your sig pic, and "i'm so original, look at my highly processed and filtered pictures of my piece of shit car with rubber band tires on gaudy oversized wheels worth an order of magnitude more than my horribly-aligned car #hatespeedbumps #lowlyfestyle #nofatchix #Imafuckinmoron #lookatmeplease" low
                  Quit whining.

                  Something like this will be my final ride height, but with more aggressive wheels



                  I've modified the car without auto-x in mind so I'm screwed as far as classing goes (M50 swap, coilovers, 5 lug). As I said before I have M3 suspension so I can add roll center adjusters if the control arms don't look good. Yes I wil have more camber than necessary in the rear, because E30, but like I said, I have the subframe riser bushings for however much they help.

                  I think I just need to get out as soon as I can to a local event and see how it goes.
                  For all things 24v, check out Markert Motorworks!
                  Originally posted by mbonanni
                  I hate modded emtree, I hate modded cawrz, I hate jdm, I hate swag, I hate stanceyolokids, I hate bags (on cars), I hate stuff that is slowz, I hate tires.

                  I am a pursit now.

                  Comment


                    #24
                    I'm under the impression you could fit in DSP without the bump centre kit. Maybe the m3 5lug will get you anyways, but I don't know for sure.
                    Originally posted by priapism
                    My girl don't know shit, but she bakes a mean cupcake.
                    Originally posted by shameson
                    Usually it's best not to know how much money you have into your e30

                    Comment


                      #25
                      The swap puts him in SM regardless.
                      Originally posted by kronus
                      would be in depending on tip slant and tube size

                      Comment


                        #26
                        Yea.....that isn't the stupid low I was referring to. Unless the site sucks you should be fine. You are definitely in SM.
                        2017 Chevrolet SS, 6MT
                        95 M3/2/5 (S54 and Mk60 DSC, CARB legal, Build Thread)
                        98 M3/4/5 (stock)

                        Comment


                          #27
                          SM isn't the end of the world. personally, I could care less about being seriously competitive at autox. Trailering a purpose built car for 5 minutes of seat time seems pretty ridiculous to me. on the local level you can have a lot of fun and most people aren't great drivers anyway. run what you brung!
                          Build thread

                          Bimmerlabs

                          Comment


                            #28
                            Not sure how well attended your events are, but I ran SMF a few years ago in a SuperCharged Focus ZX3, and took the class, merely by showing up to every event. There were cars faster then me, but none were as consistent (in times or attendance.)

                            Just go out and have fun.. Remember, it's a $3 trophy at best - the memories are worth more.
                            1991 325i MT2 Touring (JDM bro)
                            2016 Ford Flex
                            2011 Audi A3 - wife's other German car

                            Comment


                              #29
                              Originally posted by Roysneon View Post
                              Quit whining.

                              Something like this will be my final ride height, but with more aggressive wheels



                              I've modified the car without auto-x in mind so I'm screwed as far as classing goes (M50 swap, coilovers, 5 lug). As I said before I have M3 suspension so I can add roll center adjusters if the control arms don't look good. Yes I wil have more camber than necessary in the rear, because E30, but like I said, I have the subframe riser bushings for however much they help.

                              I think I just need to get out as soon as I can to a local event and see how it goes.
                              Yeah M50 swaps are frustrating for classing. +30hp, now in class with 500hp evos. Don't worry about being competitive, based on my experience it's not in the cards unless you set up your car, buy slicks and can out-drive everyone. Just go have fun.
                              paint sucks

                              Comment


                                #30
                                Originally posted by Wh33lhop View Post
                                Don't worry about being competitive, based on my experience it's not in the cards unless you set up your car, buy slicks and can out-drive everyone, like me. Just go have fun.
                                Touched that up a bit for you sir. ;)
                                Originally posted by kronus
                                would be in depending on tip slant and tube size

                                Comment

                                Working...
                                X