SoCal General Chat

[glnr13]

nicely done kev

[Chilezen]

So, update on my swap...

I did all I could to put it together in my backyard. One of the last things I had to do was bleed the brakes and clutch line. The brakes seem okay but I'm having an issue with the clutch, [seen here...]

The last thing to do (besides drop the freakin trans again) is to build the exhaust. Here's how that's going:


I bought stainless pre-bent tubing (from Amazon!) and used a sketching program at work to give me degrees for where to cut. It was a lot of what you'd expect; test fitting, shaving, testing, tacking, measure out the next one. The progress you see took nearly a whole day.

To merge the two pipe, instead of buying a Y pipe or just cutting them diagonally into one, I took it a step further.







This design mimics the factory Y merge on the Z3. Work in progress!

---

& since I don't have the time or resources to figure out what's wrong with the clutch, I have to tow it to a shop :( which will probably be JMP.

[Chilezen]

I don't have any recs for your area, but I can share my experience with driveshafts. You're looking at a minimum of $400 to have it done, because every place I've been to either can't do it or claims they must replace the irreplaceable U-joints before balancing... which ends up with that final cost. Having said that, I have ordered my rebuilt driveshaft from http://www.driveshaftspecialist.com/...0html/BMW.html and sent in mine as a core.

[prisonerofdoom83]

Anywhere you guys can recommend to rebalance my driveshaft on my s50 swap e30 Santa Clarita San Fernando van nuys area

[2mAn]

[IRON-E]

You're lying! Nobody's swap passes smog!

[Chilezen]

You're lying! Nobody's swap passes smog!

[IRON-E]

I heard someone passed his swap's smog with flying colors and should be on the road soon 24V powered!

[JeLani]

welcome back jelani, where in socal do you reside?

I'm in sd , and thanks. things have been shaky past couple years.

[2mAn]

sending you a text

[Chilezen]

Your details are, uh, sparse lol. I have an extra set of M52 cams that might be available.. I'd have to see if they aren't already set aside for something else.

Edit: I have 4 sets. I can donate a set in exchange for a beer

[2mAn]

Does it matter from what car?

Nope, but ideally its an inline 6... for the length. Check your coffee table thread for details

[Chilezen]

Does it matter from what car?

[2mAn]

Whos got a junk crankshaft that I can have for free.99?

[2mAn]

Anyone know where i can get a key made with my vin?

dealership lol