PNW Chit Chat thread

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Pdxseth
    No R3VLimiter
    • May 2012
    • 3124

    #36286
    Originally posted by djjerme
    Injectors perhaps? Just had that issue on an m20, and it felt like a misfire, but the injector was dying. Those can be intermittent.. If not the injector it self, maybe check the harness for cracks, shorts..etc.

    Remember, today's corn fed fuels aren't doing our cars any favors..

    Sent from my 710C using Tapatalk


    I have also replaced the injectors but that was early on,
    Maybe 6 months ago.


    Sent from my iPhone using Tapatalk

    Comment

    • Pdxseth
      No R3VLimiter
      • May 2012
      • 3124

      #36287
      Thanks everyone, I've pretty much tested or replaced anything it could be im hoping to get some time this weekend to play with the trigger wheel and see if it's just on wonky or something.


      Sent from my iPhone using Tapatalk

      Comment

      • Matt-B
        The Waffler
        • Jun 2009
        • 3856

        #36288
        they dont really go bad, either spacing is off from the locating dowel, or CPS is bad or incorrectly spaced

        good luck


        Please leave feedback below, thanks

        http://www.r3vlimited.com/board/showthread.php?t=358170

        Comment

        • Pdxseth
          No R3VLimiter
          • May 2012
          • 3124

          #36289
          With as low as I am there's a good chance of it getting damaged, I've broke my pan a few times it's very possible i knicked it in a pothole or something


          Sent from my iPhone using Tapatalk

          Comment

          • Matt-B
            The Waffler
            • Jun 2009
            • 3856

            #36290
            https://www.ecstuning.com/BMW-E30-31...ats/ES2973132/

            looks like bmw has a new part # for the "black" floor mats, and there available again. new design tho


            Please leave feedback below, thanks

            http://www.r3vlimited.com/board/showthread.php?t=358170

            Comment

            • 5Toes
              Banned
              • May 2010
              • 9836

              #36291
              trigger wheels go bad on m42 quite often it seems. is the m50 rubber isolated as well? My m42 had a bad crankpulley/trigger wheel and the CPS signal was brekaing up at higher rpms.

              have you triple checked your wiring and harness?

              Comment

              • 5Toes
                Banned
                • May 2010
                • 9836

                #36292
                wow the angst is real.

                Comment

                • ncsubowen
                  E30 Enthusiast
                  • Nov 2013
                  • 1012

                  #36293
                  Originally posted by 5Toes
                  wow the angst is real.
                  Everyone is in a shit mood apparently

                  Sent from my SAMSUNG-SM-N910A using Tapatalk
                  sigpic

                  4 doors.. so much room for activities!

                  IG @bluebombr

                  Transaction Feedback:

                  http://www.r3vlimited.com/board/showthread.php?t=323622

                  Comment

                  • Matt-B
                    The Waffler
                    • Jun 2009
                    • 3856

                    #36294
                    I off today, tinkering with boot designs, and the e30, good day for me.


                    Please leave feedback below, thanks

                    http://www.r3vlimited.com/board/showthread.php?t=358170

                    Comment

                    • RainRider
                      Grease Monkey
                      • Aug 2014
                      • 362

                      #36295
                      Hey Toes, whats the offset on those wheels for sale?

                      Comment

                      • 5Toes
                        Banned
                        • May 2010
                        • 9836

                        #36296
                        Rainrider, they are stamped 15x6.5 ET40. I am including in the sale, for asking price, a pair of 15mm spacers and extended lug bolts to clear up front. $250
                        Attached Files

                        Comment

                        • RainRider
                          Grease Monkey
                          • Aug 2014
                          • 362

                          #36297
                          Ahh. Et40 makes me a little uncomfortable. Nice looking wheels though. Thanks

                          Comment

                          • 5Toes
                            Banned
                            • May 2010
                            • 9836

                            #36298
                            yup. Id keep them for myself if the offset was lower. they are pretty lightweight at only 3.5lbs more poer wheel and tire than a stock basketweave. I have them installed in the pics with 25mm spacers on my stud kit and they look great

                            Comment

                            • djjerme
                              R3V Elite
                              • Sep 2010
                              • 5082

                              #36299
                              While I was beating on the racecar this afternoon at Dynasport, my buddy slipped on some tools and this fell on my car..



                              Sent from my 710C using Tapatalk
                              1991 325i MT2 Touring (JDM bro)
                              2016 Ford Flex
                              2011 Audi A3 - wife's other German car

                              Comment

                              • Matt-B
                                The Waffler
                                • Jun 2009
                                • 3856

                                #36300
                                Originally posted by djjerme
                                While I was beating on the racecar this afternoon at Dynasport, my buddy slipped on some tools and this fell on my car..



                                Sent from my 710C using Tapatalk



                                Please leave feedback below, thanks

                                http://www.r3vlimited.com/board/showthread.php?t=358170

                                Comment

                                Working...