PNW Chit Chat thread

[Pdxseth]

Injectors perhaps? Just had that issue on an m20, and it felt like a misfire, but the injector was dying. Those can be intermittent.. If not the injector it self, maybe check the harness for cracks, shorts..etc.

Remember, today's corn fed fuels aren't doing our cars any favors..

Sent from my 710C using Tapatalk

I have also replaced the injectors but that was early on,
Maybe 6 months ago.


Sent from my iPhone using Tapatalk

[Pdxseth]

Thanks everyone, I've pretty much tested or replaced anything it could be im hoping to get some time this weekend to play with the trigger wheel and see if it's just on wonky or something.


Sent from my iPhone using Tapatalk

[Matt-B]

they dont really go bad, either spacing is off from the locating dowel, or CPS is bad or incorrectly spaced

good luck

[Pdxseth]

With as low as I am there's a good chance of it getting damaged, I've broke my pan a few times it's very possible i knicked it in a pothole or something


Sent from my iPhone using Tapatalk

[Matt-B]

https://www.ecstuning.com/BMW-E30-318is-M42_1.8L/Interior/Floor_Mats/ES2973132/

looks like bmw has a new part # for the "black" floor mats, and there available again. new design tho

[5Toes]

trigger wheels go bad on m42 quite often it seems. is the m50 rubber isolated as well? My m42 had a bad crankpulley/trigger wheel and the CPS signal was brekaing up at higher rpms.

have you triple checked your wiring and harness?

[5Toes]

wow the angst is real.

[ncsubowen]

wow the angst is real.

Everyone is in a shit mood apparently

Sent from my SAMSUNG-SM-N910A using Tapatalk

[Matt-B]

I off today, tinkering with boot designs, and the e30, good day for me.

[RainRider]

Hey Toes, whats the offset on those wheels for sale?

[5Toes]

Rainrider, they are stamped 15x6.5 ET40. I am including in the sale, for asking price, a pair of 15mm spacers and extended lug bolts to clear up front. $250

[RainRider]

Ahh. Et40 makes me a little uncomfortable. Nice looking wheels though. Thanks

[5Toes]

yup. Id keep them for myself if the offset was lower. they are pretty lightweight at only 3.5lbs more poer wheel and tire than a stock basketweave. I have them installed in the pics with 25mm spacers on my stud kit and they look great

[djjerme]

While I was beating on the racecar this afternoon at Dynasport, my buddy slipped on some tools and this fell on my car..



Sent from my 710C using Tapatalk

[Matt-B]

While I was beating on the racecar this afternoon at Dynasport, my buddy slipped on some tools and this fell on my car..



Sent from my 710C using Tapatalk