PNW Chit Chat thread
Collapse
X
-
-
Have you tried using a giant punch? One that's bigger than the diameter of that center triangle? I had one really stuck a few days ago, had to use a giant chisel (all I had around at the moment) and an 8 lb sledge and it barely came out. You really need to have something almost as big as the diameter of the shaft to hit on, though.
Comment
-
to get the hub out. Then, use this Fwd bearing kit to get the bearings pushed out and back in.
sigpic
Currently without an e30. Will probably die soon.
Comment
-
Huge thanks to RainRider this evening, he was extremely generous and happily loaned out his time and tools to get the job done right; putting it back together from here should be a breeze.Comment
-
Rad. I'm glad to hear it went smoothly. Sure made a hell of a difference with my car once it was all said and done.
Sent from my Z981 using Tapatalksigpic
Currently without an e30. Will probably die soon.
Comment
-
The only odd thing was when Rainrider and I felt the hub it felt solid, like the bearing was good.
The noise was when turning right though so I thought it would be the left bearing, fingers crossed I guess?Comment
-
Anyone got some early MY fog light connectors (chassis side) or know of any other BMW cars that had them?
The markings on some that I have say - cut the wiring too short so I can't reuse them:
BMW 1 373 197
AMP 926172
I can't find them in realoem, but from what I found they are also in e34s.
Comment
-
1991 325i MT2 Touring (JDM bro)
2016 Ford Flex
2011 Audi A3 - wife's other German carComment
-
Anyone got some early MY fog light connectors (chassis side) or know of any other BMW cars that had them?
The markings on some that I have say - cut the wiring too short so I can't reuse them:
BMW 1 373 197
AMP 926172
I can't find them in realoem, but from what I found they are also in e34s.
1991 325i MT2 Touring (JDM bro)
2016 Ford Flex
2011 Audi A3 - wife's other German carComment
-
I ended up building a tool for myself, I used a 2' section of square stock, with 3 holes drilled in it. first hole was near the end, 2nd one was 100mm on center from the first. the center hole was 50mm from the first hole, on center....See where this is going? All it took then was 2 bolts that would thread into the lug bolt holes, then I used a steering wheel puller for the center, to actually do the work. Made quick work of my stuck axle.Dumpster Fire PilotComment
-
I need an e30 for pornComment
-
Also who has a nice car for a photo shoot?Comment
-
Comment
Comment