Thanks man! I now live in Lawrenceville GA :(
Announcement
Collapse
No announcement yet.
S54 swap questions and concerns
Collapse
X
-
Why haven't you stopped by?!
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Were not far :)
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Edit: Gonna have to take that back, can't come tomr, engine mounts just went bye bye :(
Oh my....lol I just mapped ur address and I don't really have an excuse anymore as to why I havnt stopped by, you guys are 13mins away from me, don't know why I remembered 50mins :( I will stop by tomr :)Last edited by jink0619; 11-24-2015, 06:47 PM.sigpic
E30love
Comment
-
lol its all good. See you after the holidays ;)
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
Keep in touch!
Check Us out on Facebook
Needing a harness adapter or wiring help? Check it out: also have 24v motor mounts, E30 M3 covers and E36 ECU mounts!
Full Product Line Tuning
OBD2 Tuning Available! OBD2 E36, S54 Swap, S62 Swap, etc: tuning@MarkertMotorWorks.com Dyno Thread
Comment
-
I'm putting an S54+6 speed in an E28 (85 528i Euro chassis).
Next weekend I'll be visiting the donor car (2005 M3 6-speed) and have the chance to get pretty much whatever I want off the car. Below is the list of parts I'll be taking. Question is: Is there anything else I should grab that might be useful in the swap?
- Engine
- Wiring harness (un cut). I'm gonna use a z3m harness, but i'm getting the e34 harness anyway.
- Oil cooler lines
- ECU
- Tranny
- Shifter parts
- Gas pedal
- Gas pedal switch (e-gas) + plug that goes to it with as much pigtail (at least 8-10”) as possible
- Brake light switch + plug that goes to it with as much pigtail (at least 8-10”) as possible
- Clutch switch + plug that goes to it with as much pigtail (at least 8-10”) as possible
- Body-side engine harness connectors with 8-10” pigtail (X60003, X60004, X60002)
- Front sub-frame & engine mounts (just the sub-frame, no suspension components).
- I think there is a transmission/shifter bracket welded/riveted to the transmission tunnel.
- S54 Headers
- Transmission mount/cross-member (may be able to modify it?)
Anything else I'm missing?
Comment
-
Originally posted by nando View Post5 bar fpr. The EKP and fan controller would be good too.
Where's the FPR mounted on the E46/M3?
Same question for the fan controller. I can't find it on RealOEM.
I'm already planning a single in-tank 255lph fuel pump. not sure how an EKP will fit an E28?Last edited by cek; 01-11-2016, 09:04 PM.
Comment
-
Originally posted by nando View PostIts part of the fan, but you can cut it off and use it with any aftermarket fan.
Comment
-
Originally posted by cek View PostThanks. That explains why I couldn't find it separately. Appreciate your help.
Comment
Comment