Shift Lever and Short Shifters

[merlinfe]

'08 335i Shifter fits fine

I had an extra shift lever from my '08 335i. It fit great and shortened the throw considerably. I'll take some pictures when I get the interior back together.

Edit: Actually here you go.

Order goes E30, E90 335i, E90 330i

[ethrtyiS]

anyone ever hear of putting in an e46 short shift lever?

[brutus87]

Have you installed it yet?

Not yet, hopefully on Tuesday!

[jaywood]

ordered a z4 3.0 well see how it works

Have you installed it yet?

[///digitalme]

It looks similar to the z4, I would say 2.5 cuz the 3.0 sits tilted forward I think. Heres my 2.5:


It almost looks lower though... But I thought z4 shifters were the lowest ones. Oh well :P

Yeah looks similar to mine but on the picture I posted it's actually on 2nd gear. Looks like it's in neutral but neutral is like where 1gear should be. It's not bad though feels really nice and shifts are nice and easy

[e30BMart]

It looks similar to the z4, I would say 2.5 cuz the 3.0 sits tilted forward I think. Heres my 2.5:


It almost looks lower though... But I thought z4 shifters were the lowest ones. Oh well :P

[///digitalme]

how can you tell what shifter you have??
i have one installed on my 318is, and have no clue what it is..its short though and its an original bmw with part number, although the part number doesnt show up when i have searched it...
this is how it sits...i was told it looked like a z4?

[Ramgoat]

Where are you guys buying your levers?

anywhere. for the most part, your looking for people parting out e36 328s/m3s. I paid $28 shipped for mine from an e36m (lucky!). Look around, check CL and bimmerforums, theres always someone willing to sell the lever for less than $50.

What up E30gentry..I cant get my bitchclip off and if u would like to help me install my kit thatd be great. Ive had a couple friends help but we couldnt finish or get the white clip off to lift the lever..i know it turns and pops off but ugghh has it been resistant.
let me know if ur goin to brody's 2

i used a small (broken) test light. the sharp point helped prying it out. Flat heads and phillips werent really that effective. Something small pointy and stiff (pause) worked best.



Again, i just did mine (all new bushings and an e36m lever) less than two weeks ago. Pm me for any detailed questions.

[e30gentry]

Could you put this link on first post: http://www.m42club.com/forums/showthread.php?t=73
It has a pps of How to replace the shifter. Was very helpful. I had no idea how to do it and I did it in 30 minutes.

PS: I just installed my z4 2.5 and I have to say it's PERFECT, i'm in love!!!! I would like it to stay as is but I know it'll break in. It's a little notchier than stock (perfectly) and the throws are reduced dramatically! It's just perfect for daily and sporty, spirited driving. My car feels so different now and it's tight like a new car.

So you got everything installed, or still asking for help?

[e30BMart]

Could you put this link on first post: http://www.m42club.com/forums/showthread.php?t=73
It has a pps of How to replace the shifter. Was very helpful. I had no idea how to do it and I did it in 30 minutes.

PS: I just installed my z4 2.5 and I have to say it's PERFECT, i'm in love!!!! I would like it to stay as is but I know it'll break in. It's a little notchier than stock (perfectly) and the throws are reduced dramatically! It's just perfect for daily and sporty, spirited driving. My car feels so different now and it's tight like a new car.

[e30BMart]

Could you put this link on first post: http://www.m42club.com/forums/showthread.php?t=73
It has a pps of How to replace the shifter. Was very helpful. I had no idea how to do it and I did it in 30 minutes.

PS: I just installed my z4 2.5 and I have to say it's PERFECT, i'm in love!!!! I would like it to stay as is but I know it'll break in. It's a little notchier than stock (perfectly) and the throws are reduced dramatically! It's just perfect for daily and sporty, spirited driving. My car feels so different now and it's tight like a new car.

[e30BMart]

I bought a z4 2.5 with bush bearing, 4 yellow shims, 2 securing clips and one shifter bushing plus a ZHP knob, but I've never done much work on cars as this is my first one. I only found a diy for e36 shifters and replacing bushings.. Is this something I can do myself? Do I need special tools and/or need to drop the tranny? Thanks

[brutus87]

ordered a z4 3.0 well see how it works

[e30gentry]

Yea it "just" turns and pops off is what i thought too. With a hook type pick and a small pocket screw driver and some time maybe, once the clip is turned use the pick(s) and or pocket screw drivers to pop the tabs out on the sides and it should make its way out, kinda takes three hands.

[ROLLingKING]

Just installed my Z4 2.5L shifter in 1hr time including bending the rod, everything! I have to say i love the feel it isn't notchy at all, perfect for a daily and highly recommended for anyone who is considering this. If anyone is the area will be happy to put one in for you or help.
Will post pics once i get i nice shift knob to go on it.

What up E30gentry..I cant get my bitchclip off and if u would like to help me install my kit thatd be great. Ive had a couple friends help but we couldnt finish or get the white clip off to lift the lever..i know it turns and pops off but ugghh has it been resistant.
let me know if ur goin to brody's 2