Interest in Bolt on Turbo kit?

[thomas88162]

You are not that far away...come up this summer and I'll make a manifold off your car.

...You are certainly tempting me.

[jntar]

Where do you recirculate it to?

Back in pre-turbo/post AFM.

[Balleristic31]

With Jake's tune you will need to recirculate the BOV. Since it uses the stock AFM pre-turbo, it's already metered the air and will go very rich once you're off throttle. It would probably still work vented to atmosphere, but would likely die when downshifting or coming to an idle from higher RPM.

Where do you recirculate it to?

[PFCRayB]

Maybe that's why it backfired everything I was off throttle.....since I didn't build the motor I ended up lifting the head since the guy I bought the motor from didn't use Apr studs like he told me.....

[jntar]

I had a 1g dsm bov

With Jake's tune you will need to recirculate the BOV. Since it uses the stock AFM pre-turbo, it's already metered the air and will go very rich once you're off throttle. It would probably still work vented to atmosphere, but would likely die when downshifting or coming to an idle from higher RPM.

[PFCRayB]

I had a 1g dsm bov

[jntar]

The basic is what's your set up, my old set up was a internally wastgated t3 turbo, running 16psi, a rrfpu, stock dme, and I can't remember what injectors I had

TD04-15g internal WG
NXS Signature Manual boost controller
9psi
running a bosch recirculating valve
42lbs injectors

[PFCRayB]

The basic is what's your set up, my old set up was a internally wastgated t3 turbo, running 16psi, a rrfpu, stock dme, and I can't remember what injectors I had

[jntar]

Do you mind if I ask a few questions on your car

Ask away.

[PFCRayB]

Do you mind if I ask a few questions on your car

[jntar]

I apologies in advance for not reading though the whole thread since I'm on my phone but are you offering the dme separate?

He does offer a turbo chip separate. I am running it in my turbo car currently. PM him and he will give you details.

[PFCRayB]

I apologies in advance for not reading though the whole thread since I'm on my phone but are you offering the dme separate?

[jakeb]

You are not that far away...come up this summer and I'll make a manifold off your car.

[thomas88162]

I mean intake manifold, although maybe the E36 one will fit. I dont think anyone has ever had a reason to try it.

The E36 shock tower is much more forward which mskes top mount manifolds difficult for them. Since the M42 is shorter its hard to tell if things will fit or not. Try and find out :)

Believe me, I want to! Unfortunately, the more I look into it, the more I don't believe it will fit :(. I think my car is doomed to being N/A... lol.

[wazzu70]

I mean intake manifold, although maybe the E36 one will fit. I dont think anyone has ever had a reason to try it.

The E36 shock tower is much more forward which mskes top mount manifolds difficult for them. Since the M42 is shorter its hard to tell if things will fit or not. Try and find out :)