Originally posted by Zacm829
View Post
Announcement
Collapse
No announcement yet.
From Boost to Reliable. M62b44 Swap!
Collapse
X
-
Originally posted by Tjabo View PostI also can't wait to find out if this ends up being a reliable setup like you expect. I have my doubts about that part, but interesting to see if an M62 can be reliable when it's in a much simpler vehicle than they are normally found in.
Comment
-
Yeah, I didn't express myself very well. Aside from leaking fluids from every possible location, I think my M62 has been pretty reliable. However, there are so many fragile complexities and accessories around the engine in the e39 that it seems like nothing is reliable. When I really think about it though, the engine has been good.
Comment
-
Originally posted by Tjabo View PostYeah, I didn't express myself very well. Aside from leaking fluids from every possible location, I think my M62 has been pretty reliable. However, there are so many fragile complexities and accessories around the engine in the e39 that it seems like nothing is reliable. When I really think about it though, the engine has been good.
Comment
-
Originally posted by Pipes View PostSound clip sometime soon?
Originally posted by JGood View PostYeah true, the e39 does have the water cooled alternator, and I'm sure the OBD-II stuff can nickel and dime you to death. I was thinking more OBD-I converted m62 with everything unnecessary deleted. The engine itself is pretty solid, as long as timing guides are changed and oil pump bolts are tightened.
Comment
-
Originally posted by Zacm829 View PostYeah, I agree. I was happy to find a healthy non vanos motor when I did. Convert to OBD-I and should be basically worry free. Timing guides and oil pump nut were addressed. Thinking on doing the m60 hybrid down the line as a side project! As always your car was the one that inspired me to do the v8 and your earth day post just confirmed it.
Haha, tires are the most expensive part of v8 e30 ownership.
Comment
-
Was able to battle the coolant system and finally get the car bled after hours of tinkering with it, turns out we had the reservoir hooked up incorrectly. We are running the e32 coolant expansion tank for now.
Big push now for the track day and brodeo the first week in June.
Threw some stealth paint on the carbon steel muffler.
Also got some sticky rubber for the rear, looking forward to seeing what she can do on Road Atlanta
Working on her some more this upcoming week and I'll bring the gopro for some exhaust clips.
Comment
-
Had the Vintage this weekend so did get much accomplished. The week before we did manage to make a battery tie down, fit the e32 coolant bottle as our original design needed some tweaking. We also clearanced the hood for the new bottle.
To the pictures.
Managed to throw the bumpers and front end on, it's been off for 2.5 years so excuse the dust.
And a sneak peak at the next update!
Last edited by Zacm829; 05-30-2016, 05:13 PM.
Comment
-
Let me know what all you had to do to fit the 245's in the rear I plan to run the same thing in the near future1989 325i LS Swap (Money Pit):https://www.r3vlimited.com/board/sho...d.php?t=244933
COTM Feb 2019: https://www.r3vlimited.com/board/sho...d.php?t=428404
Comment
-
Yeah I guess it all depends on the wheels1989 325i LS Swap (Money Pit):https://www.r3vlimited.com/board/sho...d.php?t=244933
COTM Feb 2019: https://www.r3vlimited.com/board/sho...d.php?t=428404
Comment
Comment