Originally posted by HellzMindPlaya
View Post
Announcement
Collapse
No announcement yet.
5-lug Setup
Collapse
This is a sticky topic.
X
X
-
The trailing arms are off a 2.8 Z3 and they are 8.5 inch wide wheels with an offset of +45mm. Hope they fit if I change out the hubs to my trailing arms. The car is an 89 so I need to use these hubs, I just didn't/don't want to screw with the wheel bearings so I tried just bolting up the trailing arm first.sigpice30 Sold long ago - Too many BMWs since then... For now 2006 M5
Comment
-
Originally posted by Aptyp View Postgot e36m3 spindles and brakes for all 4 corners today. No I need to wreck my head to figure out how to install rear brakes. I'd like those huge m-calipers and rotors all around.
"BMW Style 32 Poster-Child"
HTTP://WWW.CLAVINZERO.COM/e30-5-lug
**(My Guide to E36 M3/Z3 1.9L 5-lug Swap)**
Comment
-
under rear set up 86+ 318/325 for the [Brake Rotor 34-21-1-164-399 z3 I-6]
you can use the rotor from a 1.9L Z3 since it uses the same rotor as the I-6.Last edited by robmespeedy; 10-21-2009, 12:40 PM.
Comment
-
Originally posted by Aptyp View Postif that's the case, then all 318ti and z3 rotors are the same, are they?
BMA shows them to be the same, but my ETK and WorldPAC doesn't. So better safe than sorry. Someone chime in on this issue.
but the 318ti rotors are not the same as the z3's
Comment
Comment