ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts
  • jaywood
    R3V Elite
    • Jul 2010
    • 4528

    #4921
    16x9 brock b1's
    et15 all around
    Late model
    BC coilovers
    Tires are 215/45

    What do I need? Currently on stock bottle caps with stock lugs.
    Last edited by jaywood; 01-17-2012, 10:46 AM.

    Comment

    • mkcman17
      R3V OG
      • Jul 2010
      • 8240

      #4922
      16x7.5 et35 with 205/50 on an ix?
      1989 325is / 2.7, 274 cam, e30 M3 5-lug
      1989 LN106 Hilux / 3.0TD SFA
      1974 2002tii / stock
      2002 IS300 / 5spd LSD

      Comment

      • Mystikal
        Moderator
        Wheel Fitment Expert
        • Nov 2003
        • 9602

        #4923
        Originally posted by fixedsix
        I bought these 4x100 MINI COOPER S wheels with a hub bore of 56.1 for mini. BMW/VW use 57.1. So the wheels don't fit unless I would run a hub centric spacer to clear the hub pilot on the BMW, then attach the wheel.
        The wheels look better with a 10mm-20mm spacers because mini wheels have around a 40 mm offset. Do you think this would be a problem? The pictures below show the wheel attached with around 10mm spacer. This was just a test fit.
        Those are what, 17x7 +40 or something similar, right?

        I'd suggest 20mm spacer/adapters all around with 215/40 tires.

        Comment

        • Mystikal
          Moderator
          Wheel Fitment Expert
          • Nov 2003
          • 9602

          #4924
          Originally posted by Jozi
          Thanks, I suspect I'll be doing some work. What about 215/45's? I'm more a fan of little stretch than lots.

          I've noticed 215/45's are quite expensive compared to 205/45 or 225/45's, which put me onto 225/45, or if I had to 205/45's
          215/45 requires some fender massaging but is possible. Make sure you search for pics first to see if you like it, the stretched sidewall can start to look funny at that height.

          Comment

          • Mystikal
            Moderator
            Wheel Fitment Expert
            • Nov 2003
            • 9602

            #4925
            Originally posted by bmwscaner
            How to fit rims bbs rs 5x120 to 4x100 range of screws?
            Is it possible redril?

            I have this rims and i wan't to fit them on my e30 :D
            Need to know the offset and width they are, then I can suggest how to fit them.

            Comment

            • Mystikal
              Moderator
              Wheel Fitment Expert
              • Nov 2003
              • 9602

              #4926
              Originally posted by Chrisv006
              1991 318is Euroweave question. The car is getting an s52 soon, so I am thinking traction..

              By the numbers, I could go to a 225/50/15 and not change the overall diameter (from stock) at all, but will it fit? The car is lowered on H&R OE springs (~1.25" drop all around) with KYB g2's.
              Easy fit, no fender rolling needed.

              Comment

              • Mystikal
                Moderator
                Wheel Fitment Expert
                • Nov 2003
                • 9602

                #4927
                Originally posted by BrooklynMW
                I'm changing my question:

                I'll be purchasing a set of Yokohama S.Drives soon. I've read a bunch of reviews and I really think they're the best tire for my budget. I realize these tires are not built for winter. But my question is, how much of cold temperatures can they endure before getting damaged?

                I'm going to be driving across country again soon, from NYC to San Diego, and I'd like to have a fresh set of tires to take the trip with. So assuming I get the tires a few days before my trip, they'll onyl see a few days of cold weather in NY, and possibly 2-3 days on the trip before I get far enough South where the weather is warmer.

                So, you think I can put them through a few days? Or should I take my chances with my old tires, and get the S.Drives once I get out to California?
                If there's no snow, drive on them. Below freezing they will get very dangerous though.

                Comment

                • Mystikal
                  Moderator
                  Wheel Fitment Expert
                  • Nov 2003
                  • 9602

                  #4928
                  Originally posted by aDdiktD
                  I just bought a set of wheel which is 16x7 +40 on 215/45/16. Want to know if I will need any spacers? I'm planning to buy koni yellow/ground control and roll fenders. Want a nice fitment. Thanks!
                  15mm F 20mm R spacers.

                  To really go flush 20mm F 25mm R.

                  Comment

                  • Mystikal
                    Moderator
                    Wheel Fitment Expert
                    • Nov 2003
                    • 9602

                    #4929
                    Originally posted by Robgrover
                    I have narrowed down my potential wheel choices but am having a hard time figuring out fitment.

                    Option one:
                    17x7 27 offset
                    Discount Tire Direct is retiring, but check out our partners at Tire Rack! With tires and wheels for virtually every vehicle make and model, Tire Rack is your new source for the best prices and selection for online and mail-order purchases.


                    Option Two:
                    16x7 20 offset
                    Discount Tire Direct is retiring, but check out our partners at Tire Rack! With tires and wheels for virtually every vehicle make and model, Tire Rack is your new source for the best prices and selection for online and mail-order purchases.


                    I currently have Bilstein Sport shocks with H&R sport springs so the car is lowered. I also do not like stretched tires and am wondering what tires I can put on them and not have them rub. I can roll the fenders if need be.
                    215/40/17 and 205/50/16. No fender rolling needed, tires will be far from stretched.

                    Comment

                    • Mystikal
                      Moderator
                      Wheel Fitment Expert
                      • Nov 2003
                      • 9602

                      #4930
                      Originally posted by jaywood
                      16x9 brock b1's
                      et15 all around
                      Late model
                      BC coilovers
                      Tires are 215/45

                      What do I need? Currently on stock bottle caps with stock lugs.
                      Scroll up a bit, I just discussed this exact setup with Jozi.

                      As for hardware, hubcentric rings if they wheels didn't come with a set.

                      Comment

                      • Mystikal
                        Moderator
                        Wheel Fitment Expert
                        • Nov 2003
                        • 9602

                        #4931
                        Originally posted by mkcman17
                        16x7.5 et35 with 205/50 on an ix?
                        Perfect.

                        Comment

                        • jaywood
                          R3V Elite
                          • Jul 2010
                          • 4528

                          #4932
                          Originally posted by Mystikal
                          Scroll up a bit, I just discussed this exact setup with Jozi.

                          As for hardware, hubcentric rings if they wheels didn't come with a set.
                          Got it

                          Not sure if they're coming with hubcentric rings or not...it's coming off of a corrado.

                          I've got some extra ones from esm..would those work?

                          Comment

                          • Robotin
                            R3V Elite
                            • Jun 2011
                            • 4471

                            #4933
                            would 195/55 have too much stretch on a stock IX weave... 15x7 ET 41 ????
                            1989 325i SETA stroker [delphin] R3V'd 8/31/2011
                            1989 325ix [zinnoberrot] $OLD
                            1970 2002 [Nevada]

                            Originally posted by Herr Faust Schinken
                            guy must have slid into something that doesn't look like a car vs car hit
                            Originally posted by ak-
                            Must of slid into Rob

                            Comment

                            • e30lyf
                              R3V Elite
                              • May 2007
                              • 4516

                              #4934
                              BBS RS 16x7 et25 (1' lip) and 16x8 et12 (2' lip). i want to change the lip. how wide i can go to get flush/stance? TIA

                              for now i'm running koni sport and IE3 w/ drop hats on late model. i might upgrade GC coilover soon. i have tires 205/45/16 never been mount on those rims.
                              - Fercy -

                              BimmerHeads
                              Classic BMW Specialists
                              Santa Clarita, CA
                              www.BimmerHeads.com

                              Comment

                              • tk-421
                                Wrencher
                                • Sep 2011
                                • 291

                                #4935
                                How would E38 Style 5's (16x8, et23) fit on 18mm adapters (minimum, can be 20mm) while on 205/45/16 rubber? It'll be on stock 325i suspension and then on BC coilovers, opinions on both suspension setups would be the bee's knees. I'm be using the adapters temporarily while I assemble my 5-lug conversion parts.
                                1990 E30 325i sedan - Gletscherblau (280) over Indigo cloth (0271)

                                Comment

                                Working...