Announcement

Collapse
No announcement yet.

ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread

Collapse
This is a sticky topic.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    16x9 brock b1's
    et15 all around
    Late model
    BC coilovers
    Tires are 215/45

    What do I need? Currently on stock bottle caps with stock lugs.
    Last edited by jaywood; 01-17-2012, 11:46 AM.

    Comment


      16x7.5 et35 with 205/50 on an ix?
      1989 325is / 2.7, 274 cam, e30 M3 5-lug
      1989 LN106 Hilux / 3.0TD SFA
      1974 2002tii / stock
      2002 IS300 / 5spd LSD

      Comment


        Originally posted by fixedsix View Post
        I bought these 4x100 MINI COOPER S wheels with a hub bore of 56.1 for mini. BMW/VW use 57.1. So the wheels don't fit unless I would run a hub centric spacer to clear the hub pilot on the BMW, then attach the wheel.
        The wheels look better with a 10mm-20mm spacers because mini wheels have around a 40 mm offset. Do you think this would be a problem? The pictures below show the wheel attached with around 10mm spacer. This was just a test fit.
        Those are what, 17x7 +40 or something similar, right?

        I'd suggest 20mm spacer/adapters all around with 215/40 tires.

        Comment


          Originally posted by Jozi View Post
          Thanks, I suspect I'll be doing some work. What about 215/45's? I'm more a fan of little stretch than lots.

          I've noticed 215/45's are quite expensive compared to 205/45 or 225/45's, which put me onto 225/45, or if I had to 205/45's
          215/45 requires some fender massaging but is possible. Make sure you search for pics first to see if you like it, the stretched sidewall can start to look funny at that height.

          Comment


            Originally posted by bmwscaner View Post
            How to fit rims bbs rs 5x120 to 4x100 range of screws?
            Is it possible redril?

            I have this rims and i wan't to fit them on my e30 :D
            Need to know the offset and width they are, then I can suggest how to fit them.

            Comment


              Originally posted by Chrisv006 View Post
              1991 318is Euroweave question. The car is getting an s52 soon, so I am thinking traction..

              By the numbers, I could go to a 225/50/15 and not change the overall diameter (from stock) at all, but will it fit? The car is lowered on H&R OE springs (~1.25" drop all around) with KYB g2's.
              Easy fit, no fender rolling needed.

              Comment


                Originally posted by BrooklynMW View Post
                I'm changing my question:

                I'll be purchasing a set of Yokohama S.Drives soon. I've read a bunch of reviews and I really think they're the best tire for my budget. I realize these tires are not built for winter. But my question is, how much of cold temperatures can they endure before getting damaged?

                I'm going to be driving across country again soon, from NYC to San Diego, and I'd like to have a fresh set of tires to take the trip with. So assuming I get the tires a few days before my trip, they'll onyl see a few days of cold weather in NY, and possibly 2-3 days on the trip before I get far enough South where the weather is warmer.

                So, you think I can put them through a few days? Or should I take my chances with my old tires, and get the S.Drives once I get out to California?
                If there's no snow, drive on them. Below freezing they will get very dangerous though.

                Comment


                  Originally posted by aDdiktD View Post
                  I just bought a set of wheel which is 16x7 +40 on 215/45/16. Want to know if I will need any spacers? I'm planning to buy koni yellow/ground control and roll fenders. Want a nice fitment. Thanks!
                  15mm F 20mm R spacers.

                  To really go flush 20mm F 25mm R.

                  Comment


                    Originally posted by Robgrover View Post
                    I have narrowed down my potential wheel choices but am having a hard time figuring out fitment.

                    Option one:
                    17x7 27 offset
                    Discount Tire Direct is retiring, but check out our partners at Tire Rack! With tires and wheels for virtually every vehicle make and model, Tire Rack is your new source for the best prices and selection for online and mail-order purchases.


                    Option Two:
                    16x7 20 offset
                    Discount Tire Direct is retiring, but check out our partners at Tire Rack! With tires and wheels for virtually every vehicle make and model, Tire Rack is your new source for the best prices and selection for online and mail-order purchases.


                    I currently have Bilstein Sport shocks with H&R sport springs so the car is lowered. I also do not like stretched tires and am wondering what tires I can put on them and not have them rub. I can roll the fenders if need be.
                    215/40/17 and 205/50/16. No fender rolling needed, tires will be far from stretched.

                    Comment


                      Originally posted by jaywood View Post
                      16x9 brock b1's
                      et15 all around
                      Late model
                      BC coilovers
                      Tires are 215/45

                      What do I need? Currently on stock bottle caps with stock lugs.
                      Scroll up a bit, I just discussed this exact setup with Jozi.

                      As for hardware, hubcentric rings if they wheels didn't come with a set.

                      Comment


                        Originally posted by mkcman17 View Post
                        16x7.5 et35 with 205/50 on an ix?
                        Perfect.

                        Comment


                          Originally posted by Mystikal View Post
                          Scroll up a bit, I just discussed this exact setup with Jozi.

                          As for hardware, hubcentric rings if they wheels didn't come with a set.
                          Got it

                          Not sure if they're coming with hubcentric rings or not...it's coming off of a corrado.

                          I've got some extra ones from esm..would those work?

                          Comment


                            would 195/55 have too much stretch on a stock IX weave... 15x7 ET 41 ????
                            1989 325i SETA stroker [delphin] R3V'd 8/31/2011
                            1989 325ix [zinnoberrot] $OLD
                            1970 2002 [Nevada]

                            Originally posted by Herr Faust Schinken
                            guy must have slid into something that doesn't look like a car vs car hit
                            Originally posted by ak-
                            Must of slid into Rob

                            Comment


                              BBS RS 16x7 et25 (1' lip) and 16x8 et12 (2' lip). i want to change the lip. how wide i can go to get flush/stance? TIA

                              for now i'm running koni sport and IE3 w/ drop hats on late model. i might upgrade GC coilover soon. i have tires 205/45/16 never been mount on those rims.
                              - Fercy -

                              BimmerHeads
                              Classic BMW Specialists
                              Santa Clarita, CA
                              www.BimmerHeads.com

                              Comment


                                How would E38 Style 5's (16x8, et23) fit on 18mm adapters (minimum, can be 20mm) while on 205/45/16 rubber? It'll be on stock 325i suspension and then on BC coilovers, opinions on both suspension setups would be the bee's knees. I'm be using the adapters temporarily while I assemble my 5-lug conversion parts.
                                1990 E30 325i sedan - Gletscherblau (280) over Indigo cloth (0271)

                                Comment

                                Working...
                                X