Originally posted by totheredline
View Post
Announcement
Collapse
No announcement yet.
ASK ALL WHEEL/TIRE FITMENT QUESTIONS HERE - The Official Wheel/Tire Fitment Thread
Collapse
This is a sticky topic.
X
X
-
Thanks
Originally posted by Mystikal View PostSorry, long forgot stud measurements. I know 75mm is gigantic and won't work, but otherwise unsure.
Big thanks to you aswell Mystikal!
Cheers mates!sigpic
fun
Comment
-
Im interested in some OZ turbos...
There specs are:
15x7 et15
15x7.5 et9
For this setup would I be better off with a 195/60 tire all the way around or 225/50? Or is there a better option? I do autocross my car and can roll my fenders. My suspension is ground control coilovers and only my rear tires are barely tucked. It is important that the wheels line up nicely with the fenders, will this require a rear spacer?
Thanks
Comment
-
I have a set of 16x8 et23 weaves off of an E38. I plan on using the adapters 8380 sells. Question is, what size adapters would you run? Looking for aggressive, but not a big stretch or anything like that, probably a 205 series tire. Also, I'm on GC coils with shortened housings, so the car is low.
Thanks for your help!- 2009 BMW 535xit
- 1987 325is
Comment
-
Hey guys I'm going to be buying some wheels soon and I'm trying to decide between 16x9 15 offset and 3 inch lip or 17x10 15 offset with 4 inch lip.. My car is lowered on catuned coilovers and is decently low. I was wondering if 17x10 will be tough to fit and I should just go with 16x9 since this car is my daily.. I know I'll probably need some spacers here's a picture if my car currently
Comment
-
Originally posted by macinnis View PostIm interested in some OZ turbos...
There specs are:
15x7 et15
15x7.5 et9
For this setup would I be better off with a 195/60 tire all the way around or 225/50? Or is there a better option? I do autocross my car and can roll my fenders. My suspension is ground control coilovers and only my rear tires are barely tucked. It is important that the wheels line up nicely with the fenders, will this require a rear spacer?
Thanks
Comment
-
Originally posted by 1BFL View PostI have a set of 16x8 et23 weaves off of an E38. I plan on using the adapters 8380 sells. Question is, what size adapters would you run? Looking for aggressive, but not a big stretch or anything like that, probably a 205 series tire. Also, I'm on GC coils with shortened housings, so the car is low.
Thanks for your help!
Comment
-
Originally posted by gotane30 View PostI have a set of 15x6 et33 MSW wheels that I want to run when I put on my GC coils with shortened housings, what tires should I run? Also, how much rolling/pulling am I looking at to get them neatly tucked with no rubbing
Comment
-
I wanted to check that…
AVID.1 16x8 +25 wheels… I was thinking about sticking on 5mm spacers as well for a more herra frush look (not so much)
Running 205/50/16. Is this a more square tire? when i put this on the rim, will it stretch? or bulge? I don't like the bulge look i'm getting on my 14" bottle caps. Running 195/60 or something right now. It's ugly.
Comment
Comment