nice progress! i like where this is going !
Announcement
Collapse
No announcement yet.
E30 1986 2-door from ESTONIA - restoration project.
Collapse
X
-
Thank you everybody for the good words! It gives me so much motivation to continue even if sometimes i feel exhausted and willing to give up! :)
It's morning in my country, so good morning!
I probably mentioned few posts ago that front panel of my project is little bit damaged and been repaired the way i don't like. So the whole panel will be replaced. I brought home used one, but its from the facelift model. Cooling radiator brackets and towing eye needs to be taken from the old one. But first i will take it to the sandblasting and see whats underneath the paint. I hope it's usable, but if it isn't i need to take my wallet to a dealership and buy brand new one. Unfortunately the brand new one costs 4 times more than used one. 100 euros versus 400 something euros. We will see that. My brain tells me to buy new but my wallet screams:" You are an idiot if you do that!"
By the way, that used front panel is from my old car. Looks like its time measuring kilometers has come to an end.
But the story doesn't end there. I still had to continue to remove the underseal. Luckily i see the light in the end of the tunnel. Actually i wanted to finish it yesterday, but i couldn't feel my fingers anymore (s*hit load of manual labor), anglegrinder batteries died and i ran out of wirebrush. So i had to call it a day and continue today.
Front right wheelarch.
Last edited by MarkoEST; 04-29-2023, 11:53 PM.
Comment
-
When underseal removed i noticed that one of the previous owners tried to repair the rust holes with silicone. What a moron! After that crap removed a new opening came to visible. Of course my friend (he is gonna do the whole welding) is clapping his hands, because more money and work for him and bigger disaster to my bank account. :D
That whole lower part will be replaced. There isa Lithuanian company called Valcas Garage and they produce all kinds of metal parts for different BMW models.
I need this: https://www.valcasgarage.com/product...ide-1982-1987/
As you can see, rear left part of the wheel arch has been repired but what a poor job. Also the inner and outer arch is rust damaged and needs to be fixed by a proffessional.
I bet that many bodyshops would love to do the bodywork on my car cause i have made them welding and fixing so much easier by removing everything from underneath. All together i spent around a week by removing that s*it. Of course it would have been much easier to dip it in to a acid bath or take it to a sand or a soda blasting and call it done, but i just needed to do it myself. And i saved probably many hundreds of euros doing it myself. Only thing was spent was time, but this one i have and why not use it wisely. :)
To be continued......
Comment
-
Same crap, different day. Yesterday i continued with the underseal removal like last 10 posts. But i can feel the finsihline. :)
Cleaned the side member covering so i could see all of the welding points. Making easier for the welder so he doesn't have to look for them. I knew that the left side had a small hole and little fit of rust, but after wirebrush it became a much larger problem. Soon we will find out whats underneath and how bad it really is.
Comment
-
I had a chat with the guy whos gonna do the welding on my car and decided i will remove most of the brackets from the body. It will be much easier to clean and also less time spent by the welder. And i want to educate myself so i went to the shop and bought special drill bits for the spot welding. I hope i don't f*ck it up! :D
Comment
-
Originally posted by Panici View Post
I think and i hope the next project will be something different. Replacing engines and stuff. I mean first im gonna drag this one over the finish line and then start looking for the next project. I haven't decided what would be the next victim. I want to do a E28 because i had two of them back in the day or then E30 wagon which would be more practical car sort of. I know myself that as the time goes on the more i start appreciate the originality of the car. This one i also wanted to restore to a historical vehicle which means black licence plates but it needs to be at least 95% original. Previous owners has replaced the engine and a gearbox so its out of the question. And i have to be straight with you, i don't like the way it sits with original suspension. Its like a offroader.
Comment
-
Originally posted by MarkoEST View PostAs i see you didn't install back any of these brackets you removed because you have M54 engine ? Mine will have the M20 engine with all the original brackets. I probably don't remove all of them but only these where i can see some surface rust and is not possible to clean without removing them. I try to keep it as original as possible. In the engine bay most of the brackets are in okay/good condition but underneath there are lots of bad looking brackets and i have no idea are they reusable after sandblasting or do i have to find a donor where i can get better ones. We will see after they are removed and blasted.
I think and i hope the next project will be something different. Replacing engines and stuff. I mean first im gonna drag this one over the finish line and then start looking for the next project. I haven't decided what would be the next victim. I want to do a E28 because i had two of them back in the day or then E30 wagon which would be more practical car sort of. I know myself that as the time goes on the more i start appreciate the originality of the car. This one i also wanted to restore to a historical vehicle which means black licence plates but it needs to be at least 95% original. Previous owners has replaced the engine and a gearbox so its out of the question. And i have to be straight with you, i don't like the way it sits with original suspension. Its like a offroader.
If you are going through the effort of cutting the original brackets off, you might as well see if you can make a custom setup. It will still look close to original but a little bit "special".
I also have a soft spot for the E28. I have a 1986 that will be my next restoration project. 🙂
Comment
-
Hola!
Just got home from garage. 10+ hours spent and i am exhausted! Würth drill bits was well spent money. Rear section of the car is bracket free. Kept the differential bracket because i didn't have any small tool to cut through the weld. Also rear seatbelt subframe was pretty bad after seatbelt brackets removed. So i decided not to reuse it and threw it to scrap. Now i have to find new one. I was able to find one place where i could buy that subframe but i try to find something cheaper maybe.
Lego.
- Likes 1
Comment
-
Hellish is a pretty polite way to put it. There were times when i wanted to burn that s*it. But finally managed to finish it. 19th of January 2023 i attached the chassis to a body rotisserie. Then i started to remove the axels and all the fuel and brake lines. First time i showed wire bursh to it was 22nd of January. It took me 8 days, which means 4 weekends to get where i am now. Not bad actually. It felt like forever. I also spoke with the bodyshop yesterday and we agreed to take the car there in the end of this month or in the beginning of June. I hope i can get my license done before that. I dont know about other countries, but in Estonia if you want to tow a car on a trailer you need an extra class for that and its E-class in our country.
Drilling was quite easy part but took some time to get used to it and your eye trying to find the spotwelds. I could probably drill the whole body apart, but next destination will be scrapyard and not a bodyshop. My friend would tell me to piss off with the trailer full of bodyparts. So im gonna keep it like this and let him do the work from now on.
When all the brackets removed i inspected them and realized that few of them needs some fixing before i can weld them back. But then i remembered to check the bmwfans.info page just in case if they are available any more ? I took the product codes and sent them to the dealership. You know what ? After i got the list of prices i buried any idea to restore them. All the exhaust rubber mounting brackets cost for me less than 30 euros. Im not gonna think twice.
Comment
Comment