Today, I completed the installation of the Euro Depo Smileys. Initially, I was a bit apprehensive about tackling this project because of all the articles I had read and videos I had watched. However, it turned out to be quite straightforward.
My car is an early model with sealed beam headlights originally, so I utilized the three provided wires on each side for the low beams and two of the three provided wires on each side for the high beams (the third wire was capped and unused). To ensure a secure and weather tight connection, I purchased a quality connector set from Amazon and replaced all four connectors with weather-resistant ones. I simply cut off the wire connectors that came with the headlights, crimped on the new ones, and that was all there was to it.
Having both low beam and high beams on simultaneously wasn't essential for me (since I seldom drive this car at night), and the LED bulbs I installed are more than bright enough without needed all 4 housing illuminated with the brights on. I have no complaints regarding their quality or the light output.
I would personally recommend this upgrade to anyone who's uncertain. It's an affordable, straightforward process that results in good-quality lighting.
My car is an early model with sealed beam headlights originally, so I utilized the three provided wires on each side for the low beams and two of the three provided wires on each side for the high beams (the third wire was capped and unused). To ensure a secure and weather tight connection, I purchased a quality connector set from Amazon and replaced all four connectors with weather-resistant ones. I simply cut off the wire connectors that came with the headlights, crimped on the new ones, and that was all there was to it.
Having both low beam and high beams on simultaneously wasn't essential for me (since I seldom drive this car at night), and the LED bulbs I installed are more than bright enough without needed all 4 housing illuminated with the brights on. I have no complaints regarding their quality or the light output.
I would personally recommend this upgrade to anyone who's uncertain. It's an affordable, straightforward process that results in good-quality lighting.
Comment