Strict budget, slow restoration. *Now with moar budget*

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Wh33lhop
    R3V OG
    • Feb 2009
    • 11705

    #721
    Originally posted by ngampleh
    what's problem with GC eibach spring?
    or you just wanna upgrade it to stiffer one
    Yep. I felt 450/600 was too soft when I put the R888s on before, so now it's 600/780.
    paint sucks

    Comment

    • Wh33lhop
      R3V OG
      • Feb 2009
      • 11705

      #722
      Originally posted by tinkerputzer
      Great driving! Car looked very composed throughout the course.
      Thanks dude, and it wasn't at all, lol. I am super ham fisted because it's constantly trying to swap ends on me. It really screws with you during quick transitions and trail braking.
      paint sucks

      Comment

      • agent
        Vice Grand Pubaa
        • Mar 2010
        • 7960

        #723
        Oh look! Another AutoX course NOT tailored for Miatas...
        Originally posted by kronus
        would be in depending on tip slant and tube size

        Comment

        • MikeK
          R3VLimited
          • Jan 2005
          • 2771

          #724
          nice arms bro
          Toyota Pickup

          Comment

          • cyberkaa
            E30 Mastermind
            • Jun 2009
            • 1698

            #725
            He exercises his Constitutional right to bare arms.
            -Kalim

            British Racing Green, IE Springs/Bilsteins, IE exhaust, IE SSK,
            Momo shift knob, Miller MAF conversion, K&N intake,
            Blackworks Aluminum Radiator, 5MT swapped,
            Ellipsoids w/DDM HIDs, OEM Recaro Sports, Momo Mod07 Wheel,
            Drilled+Slotted Rotors, Alpine HU/Amp/speakers, 12" enclosed sub

            Comment

            • phreshkid
              R3V Elite
              • May 2009
              • 4655

              #726
              Originally posted by cyberkaa
              He exercises his Constitutional right to bare arms.
              **bear arms**
              world renown Harry Potter expert
              sigpic

              Comment

              • AndrewBird
                The Mad Scientist
                • Oct 2003
                • 11892

                #727
                Did the S50 cams make much of a difference? Worth the money? What are you doing for tuning?

                Comment

                • cyberkaa
                  E30 Mastermind
                  • Jun 2009
                  • 1698

                  #728
                  Originally posted by phreshkid
                  **bear arms**
                  His arms are pretty hairy, I guess.
                  -Kalim

                  British Racing Green, IE Springs/Bilsteins, IE exhaust, IE SSK,
                  Momo shift knob, Miller MAF conversion, K&N intake,
                  Blackworks Aluminum Radiator, 5MT swapped,
                  Ellipsoids w/DDM HIDs, OEM Recaro Sports, Momo Mod07 Wheel,
                  Drilled+Slotted Rotors, Alpine HU/Amp/speakers, 12" enclosed sub

                  Comment

                  • Cabriolet
                    R3V OG
                    • Apr 2010
                    • 9620

                    #729
                    Originally posted by Wh33lhop
                    Yep. I felt 450/600 was too soft when I put the R888s on before, so now it's 600/780.
                    this is so true. for a good track rate like your baby. you need to be way higher than the 450. esp with the weight of the M50.

                    did you figure out the over heating issue?
                    Much wow
                    I hate 4 doors

                    Comment

                    • 88SuperETABD
                      E30 Modder
                      • Apr 2009
                      • 911

                      #730
                      Hey man!!! Never saw your thread till now...did I drive your car when it was on the 600/780 or 450/650? Its Branden, from the Food Truck Meet, you drove my car too if you remember haha.
                      (SOLD) 1988 327i Build Thread: http://www.r3vlimited.com/board/showthread.php?t=155086
                      1970 Gruppe 2 2902 M20 Turbo Build: http://www.r3vlimited.com/board/showthread.php?t=373891

                      Comment

                      • 0203
                        Noobie
                        • Oct 2013
                        • 22

                        #731
                        nice build!
                        Living that Euro life!
                        (OO==[][]==OO)

                        Comment

                        • george graves
                          I waste 90% of my day here and all I got was this stupid title
                          • Oct 2003
                          • 19986

                          #732
                          Originally posted by Wh33lhop
                          Yep. I felt 450/600 was too soft when I put the R888s on before, so now it's 600/780.
                          QUESTION: With about a 50/50 (Ok maybe 54/46?) weight distribution. And the rear springs in-set to the rear a-arms....I'm surprise that most guys don't run a much higher spring rate in the rear.. Like a 600/900. or 600/1200 (I don't know - just asking for learning)
                          Originally posted by Matt-B
                          hey does anyone know anyone who gets upset and makes electronics?

                          Comment

                          • Wh33lhop
                            R3V OG
                            • Feb 2009
                            • 11705

                            #733
                            Rotating tires



                            This is how soft R888s are



                            Raised the front a bit, tired of bottoming out and bump steer



                            Now kiss!



                            Sortaflush... offset is something



                            Originally posted by MikeK
                            nice arms bro
                            thanks bro I flexed extra hard for you trying to get that 10mm nut off (;D)

                            Originally posted by NitroRustlerDriver
                            Did the S50 cams make much of a difference? Worth the money? What are you doing for tuning?
                            They made a good amount of difference--stock M50V isn't much of a high-end motor. S50 cams make it sing a lot more up there. If I stuck with the stock cams I would probably hate it since the NV was more exciting to wring out. The cams are worth about 20whp and it really comes alive at 5k instead of wheezing out shortly thereafter; also seems they made the intake sound more aggressive.

                            Just a TRM chip.

                            Originally posted by Cabriolet
                            did you figure out the over heating issue?
                            Yep it seems fine for now. And it's not my baby, it's my dirty hobag.

                            Originally posted by 88SuperETABD
                            Hey man!!! Never saw your thread till now...did I drive your car when it was on the 600/780 or 450/650? Its Branden, from the Food Truck Meet, you drove my car too if you remember haha.
                            I remember you dude. You drove it with the higher rates on it, but the rears were riding on the bump stops and the front was too low. You can drive it again if you like, now that it has suspension travel. Way less bounce.

                            Originally posted by george graves
                            QUESTION: With about a 50/50 (Ok maybe 54/46?) weight distribution. And the rear springs in-set to the rear a-arms....I'm surprise that most guys don't run a much higher spring rate in the rear.. Like a 600/900. or 600/1200 (I don't know - just asking for learning)
                            It's been my understanding through observation that you typically want a higher front wheel rate (natural frequency) than rear. I can't give you an exact reason but I haven't seen a single setup that has a higher rear wheel rate. It'd be interesting to discuss this at length but I don't have any particular theoretical answer right now.

                            FWIW the motion ratio of the rear is about ~.65:1, so my rear wheel rate is about 780*.65^2 = 330lbs/in, whereas the front is more like 500-550lbs/in.
                            paint sucks

                            Comment

                            • tinkerputzer
                              E30 Addict
                              • Jun 2008
                              • 508

                              #734
                              Those 205/50 r888's look like a pretty good match for an 8. Not over or under stretched just nice and square. How do you like them as a dd/autocross tire? I'm trying to decide between them and the rival for my next set.

                              Comment

                              • cyberkaa
                                E30 Mastermind
                                • Jun 2009
                                • 1698

                                #735
                                My tires rotate every time I drive the car. How 'bout dem waffles, cool guy?
                                -Kalim

                                British Racing Green, IE Springs/Bilsteins, IE exhaust, IE SSK,
                                Momo shift knob, Miller MAF conversion, K&N intake,
                                Blackworks Aluminum Radiator, 5MT swapped,
                                Ellipsoids w/DDM HIDs, OEM Recaro Sports, Momo Mod07 Wheel,
                                Drilled+Slotted Rotors, Alpine HU/Amp/speakers, 12" enclosed sub

                                Comment

                                Working...