Kamotors E30-Turbo to ITB M20

[tigwerks]

Are you going to put a one way check valve on the exhaust scavange setup?

[kamotors]

Are you going to put a one way check valve on the exhaust scavange setup?

yup

[kamotors]

Car runs excellent. Roll on throttle burn outs at speed all day:)

[kamotors]

car drives so good now.:)

no tire rubbing, no dead wheel bearing groans and no clunks!

only sounds now are turbo whistle,compressor surge, flame popping and tire squealing:)

[4ce30]

Wow!! You have built Such a nice car, I really enjoyed the progress. Wish my drift car was on this level, I could do some damage!

[kamotors]

added a bit of bling,
gold colored fender flare washers:)

[ak-]

I've been trying to figure out that bumper beam weight loss for a long time and can't get the bolts off! They spin.

Is your check valve in the downpipe?

[kamotors]

the bolts have a nut on the back, its 13mm I believe and the front is the torx.

Yes the check valve it the gold thing right on top of the downpipe, that then goes to the catchcan and then to the valve cover. it goes from a nice big 1" hose down to 5/8 for the scavenge system.

[yert315]

468hp!? That, my friend, is what's up!

[sayed ali]

Awesome!

[csermonet47]

In for some rolling burnout videos ...

[jhaurimn]

I was just reading earlier on in this thread when you were saying you would start at 200 or so hp and work your way up. That's quite impressive!

[Sagaris]

I cant remember seeing an update with cam/headwork.
This is all on a stock 885 head and 2.5 bottom end, right?

Im definitely amazed either way

[kamotors]

this is all on 100% stock motor with headstuds:)

[Vivek]

Holy shit. And this is on a 22 year old head gasket. M20 FTW