'91 318is, 16V swap.

[shEck3lls0]

If i remember right the 2 white wires are connected. I think there was a green wire that runs to a resistored 12v (its the bat light on the mustang) it wont charge from what i read if the resistance isnt right. Black and yellow wire ran to distro block and the other like 10 gauge ran to the hot lead on the starter. Odd thing was it would only charge if it was run to the starter. If i ran it right to the distro block it wouldnt charge. Then it just stopped charging. Not sure if it was wiring or the alt just died.

Very interesting.... I have it straight to the distribution block. I'll try it to the starter as well as redo the green wire.

[sticksdaman]

Did she ever make it to bimmerfest? I was looking but didn't see it.

Wouldve been nice to see another e30 with my wheels on.

[FunfGan]

Nope :/ My friend went to adjust the clutch throw and the slave cylinder broke.

[jalopi]

eh? what do you mean, broke? as in your new(ish?) wilwood slave? how do you even pull that off?

[ballski]

i read through this but maybe I missed it. What fuel pump are you using? If stock, are you just restricting the 40-50 psi down to 7 by the carb with the fpr?

Keep it up man, I have the same thing going on

[Thizzelle]

is this real?

[FunfGan]

i read through this but maybe I missed it. What fuel pump are you using? If stock, are you just restricting the 40-50 psi down to 7 by the carb with the fpr?

Keep it up man, I have the same thing going on

I ended up using a Holley FPR. I'll try to find the link if you're interested, but should be fairly easy to find on Summit. Anyway, It doesn't have a gauge port(bit disappointing) but it works quite well and has a return line which is very nice, if not essential because of the amount of pressure it would need to hold with no return.

is this real?

yus.





So, burnout video tomorrow. I'm not home, but my friends took one on the way back from Mpact yesterday.

[FunfGan]

Burnout: http://youtu.be/kXnmMHk5iT0


I don't know why embedding never works on R3v...

[JasonC]

It works, you need to paste "kXnmMHk5iT0" out of the youtube link.

[FunfGan]

Ohhhhh, I was trying the different ones on Youtube, but sweet, thanks Jason!

[csermonet47]

About damn time!

[Mr. Tasty]

loookking damn good. Sounds even better.

[Pantless Spency]

yes finally!!!!

[dashboardmonkey]

That thing sounds pretty nasty

[dnick]

bee on look out burnout v2.. adjusted a couple things.. spencer and i will bring yall a better one