Melted a piston, now LSX Turbo
Collapse
X
-
-
-
cool build, I wonder whats the difference in the output shaft splines on the 210mm differential? My bud's boosted e21 just shredded the splines on his output shaft splines on his 168mm diff. And I'm pretty sure that small case and medium case axle output stub splines are interchangeable between the diffs, I'm curious if the large case has beefier splines?Comment
-
The floor of the trunk was cut out and welded shut for the fuel cell and pumps.
cool build, I wonder whats the difference in the output shaft splines on the 210mm differential? My bud's boosted e21 just shredded the splines on his output shaft splines on his 168mm diff. And I'm pretty sure that small case and medium case axle output stub splines are interchangeable between the diffs, I'm curious if the large case has beefier splines?Bang Gears & Burn Rubber.
sigpic
Instagram: @Dirk_LSXT
Buy my m20 racecar parts, help fund my lsx turbo swap.Comment
-
Bang Gears & Burn Rubber.
sigpic
Instagram: @Dirk_LSXT
Buy my m20 racecar parts, help fund my lsx turbo swap.Comment
-
I read the whole deal, this is one sick machine man!1990 325i Touring - The Bonsai Bimmer - Patiently Waiting
1984 316 Coupe - The Base Model - Pain in the Ass
1988 750iL - The Daily Driver
...And a couple others...Comment
-
Where did you get those valve covers? I looked for something like that for mine and couldn't find anything like that.
2003.5 Imolarot M3: daily
1995 Alpinweiß M3: hpde
Comment
-
Thanks!
Thanks, here's some updates.
Rear end is all sorted now.
E36 diff with a 4 clutch rebuild and 3.46 gears, CAtuned chromoly axles, z3 hubs, e46 brakes, camber/toe adjustment tabs welded in, raised subframe 12mm, cut and boxed/reinforced subframe to clear 1350 u joint.
Had to mill part of my diff to accept the 2 extra clutches.
New bolts, bearings, and clutches
It's going to be a tight fit, I still plan on reinforcing the subframe a little bit more just for peace of mind.
Next step is to machine an adapter to bolt the 1350 u joint flange to my diff input flange.
There's not much left to do for the car overall.
-Decide on front brake setup
-Wheels and tires
-Measure for driveshaft
-Make crossover and exhaust
-Buy radiator
-Finish intercooler piping
-Buy seat covers and harnessesBang Gears & Burn Rubber.
sigpic
Instagram: @Dirk_LSXT
Buy my m20 racecar parts, help fund my lsx turbo swap.Comment
Comment