-
sigpic -
Well control arms on car, I added a thin coat of grease to the shafts then slid them in
Hmm so I took lots of pics of the new parts so everybody can see what you get for $165. Surprisingly the contorl arms weigh more, as well as the tie rods. Didn't weigh the sway bar end links.Comment
-
Anybody got some extra Starter bolts, because I'm having a hard time believing a 17mm bolt fits in those two holes. The bolts I got at Ace Hardware are 10mm and fit from transmission to starter hole just fine. ThanksOriginally posted by James CrivelloneComment
-
I recently received one of these kits (although I had ordered it through eBay) and am extremely impressed
For $165 shipped I received:
2 FCP special control arms
2 Karlyn Tie Rods
2 Sway Bar end links
1 pair of E30 M3 offset CABS
Unlike other shippers, the package did not arrive so quick. It was shipped via fedex (woohoo!) and took roughly a week to reach my home in WA.
I have to say I am very impressed, these parts are a steal for $165. I have not installed all of them on the car yet, but am in the process of doing so now. One thign I would like to mention though is that you MUST order tie rod boots and new lockplates, either from Blunt or locally or something. THEY ARE NOT INCLUDED.
Here is all the parts layed out, except the CABS. I put the parts I took off up too for comparison.
Here are the control arms, which are actually quite nice. The joints are all stiff out of the box, but from what I understand it should be that way.
The boots look secured nicely and have no tears
The ball joints are indeed stamped FCP, which means these are made specifically for FCP Groton
Outer ball joint
I bent my old control arm PRETTY bad :(
The included tie rod assemblies from Pelican alone are $24 each... here is a shot of one of the boots
I even weighed the parts. I know that in some hobbies weight is a sign of quality, for instance in stereo amplifiers. The control arms and tie rods included in this kit are both heavier than the OEM that came off my car
And tie rods...
The sway bar end links are obviously Taiwanese, they are a brand called "HLC". Though they appear good enough. They arent as critical as tie rods or control arms, so I feel comfortable running them. A shot of the ball joint on one.
Will give a review after I drive the car, and long term.Comment
-
It will be interested to see how they hold up.Originally posted by SonnyComment
-
Weight is a bad thing when it comes to parts like these. The boots don't look TOO bad, but I wouldn't count on these parts lasting more than one or two years.Originally posted by 5ToesComment
-
I recently received one of these kits (although I had ordered it through eBay) and am extremely impressed
For $165 shipped I received:
2 FCP special control arms
2 Karlyn Tie Rods
2 Sway Bar end links
1 pair of E30 M3 offset CABS
Unlike other shippers, the package did not arrive so quick. It was shipped via fedex (woohoo!) and took roughly a week to reach my home in WA.
I have to say I am very impressed, these parts are a steal for $165. I have not installed all of them on the car yet, but am in the process of doing so now. One thign I would like to mention though is that you MUST order tie rod boots and new lockplates, either from Blunt or locally or something. THEY ARE NOT INCLUDED.
Here is all the parts layed out, except the CABS. I put the parts I took off up too for comparison.
Here are the control arms, which are actually quite nice. The joints are all stiff out of the box, but from what I understand it should be that way.
The boots look secured nicely and have no tears
The ball joints are indeed stamped FCP, which means these are made specifically for FCP Groton
Outer ball joint
I bent my old control arm PRETTY bad :(
The included tie rod assemblies from Pelican alone are $24 each... here is a shot of one of the boots
I even weighed the parts. I know that in some hobbies weight is a sign of quality, for instance in stereo amplifiers. The control arms and tie rods included in this kit are both heavier than the OEM that came off my car
And tie rods...
The sway bar end links are obviously Taiwanese, they are a brand called "HLC". Though they appear good enough. They arent as critical as tie rods or control arms, so I feel comfortable running them. A shot of the ball joint on one.
Will give a review after I drive the car, and long term.
all is see in these pictures are worthless junk, you wasted you money once again cells for not listening but:wgaf:.Strategic nw e30 commandOriginally posted by bmwm42Comment
-
Okay so $165 vs $450
If they get me through 2 years, well then good. Ill have a job 2 years from now and will be able to afford TRW and lemfoerder and all that good stuffComment
-
mmmmmm. I kinda know what you are thinking. They are all shiny and new. They look great. Right? But even crappy parts look great out of the box. What matters is how they hold up. I'm not knocking FCP parts - I'm sure they will work, but what will happen is that in 6 months, a year, or something, you'll start having a problem....and the thing is that you won't know exactly what part is causing the problem, or if it's something different....and in the back of your mind you'll always question if they were the right part. Suspension parts are like shoes, or a nice watch. You cheap out - they just don't last as long.
Oh well. The goal for you right now if to get your car back on the road and drivable. So - at least you have some parts to work with.Originally posted by Matt-BComment
-
^ yup George you got it exactly right. I just want my car driveable, and these parts accomplish that for me.Comment
-
For what its worth, FCP is a pretty common name for control arms over on the Audi boards.Originally posted by SonnyComment
-
^ yup I discovered that when I was researching themComment
-
Fcp = fucking crappy products.......periodStrategic nw e30 commandOriginally posted by bmwm42Comment
Comment