Ah it's an iX.
I've never seen one, but there is a transfer case attached to the back of the transmission I'm assuming?...
Announcement
Collapse
No announcement yet.
User Profile
Collapse
-
I don't see why not.
Both cars should be late models, and without the sensors in the bellhousing.
I'm not aware of any drivetrain differences between a vert and sedan.Last edited by Panici; 05-10-2024, 08:18 AM.
Leave a comment:
-
Hi, are you able to move a thread for me? I would like to move this thread:
https://www.r3vlimited.com/board/for...er-2024-projec...
-
Have been driving the M3 on-and-off the past month or so. Starting to feel/hear a soft clunk under power, so would like to investigate the rear end and bushings. Also the light scraping sound when the...
Leave a comment:
-
-
It sounds like the engine is running "too rich", with too much fuel, if it will start with the fuel pump disconnected.
Possibly the ECU thinks the engine is still cold when...
Leave a comment:
-
Looks really good Mikey!
I'd like to see that video of it in action
Leave a comment:
-
Of course an engine that flows better (and makes more power) N/A will also flow better when boosted, but when you can dynamically adjust the amount of air via boost pressure it isn't a big deal.
...
Leave a comment:
-
Not in the boxes I received. Although I should note these were from a reseller (not an official source).
Leave a comment:
-
Ah, so they just got new batch wrong. Shame too because they were so close!
Running some bright LEDs in mine so functionality isn't affected (maybe save for the reverse lights), but with...
Leave a comment:
-
-
Boy did that make for some excellent pics!
Could almost be period-correct....
- Likes 1
Leave a comment:
-
Ah, I see the USB and Bluetooth buttons now. Really does fit the look as long as you don't get too close.
I'd love to add a vintage deck to my E30, with a real tape player! Just need a spot...
Leave a comment:
-
How will you determine per-cyl mixture though? Individual EGT bungs?
Leave a comment:
-
You won't have to drop the trans.
Exhaust and heat shields should be taken off.
Could possibly leave the driveshaft in place if you have small enough hands.
Leave a comment:
-
Visually that looks fantastic!
Let me preface this by saying: I don't know anything about intake manifold design.
With that shape at the rear of the plenum, will #6 have the same airflow...
Leave a comment:
-
That looks great! Could have been a factory option.
That's a vintage unit with a tape deck?...
Leave a comment:
-
Spring 2024 Prep - Part 1
Fleet Update:
Happy to report I finished the fuel tank swap on the Miata over the winter, which is now back on the road for the season. It was extremely stressful...
- Likes 1
Leave a comment:
No activity results to display
Show More
Leave a comment: