Can Brake Balance Be Maintained E32 Master Cylinder?

[88Sedan]

I have a brand new ATE stock size MC and entirely refreshed brake system. All calipers were stripped, cleaned, and rebuilt and the rears were upgraded to solid bushings. New stainless hoses all around....

[bradmer]

Vintage Sparco seats that recline / tilt forward with slider / brackets. Tear on drivers side bolster, good shape other than that. Matching Sparco steering wheel. Can take more photos if you can provide...

[bradmer]

Looking to sell - local pickup in San Diego

drivers side and passenger side fender liners in good condition $65 for both

white engine hood with all brackets and hardware including...

[88Sedan]

I just installed 15x7 6ul's with 12.5mm spacers on my 88'. If I could order again I would have gone for the 7.5" wide option as there would have been plenty of room. I like the polished look and...

[MWe]

Currently experiencing a problem with my engine.
It is a m20b27 stroker with 1.3 moronic.

When driving the engine sometimes stutters, most noticeable during acceleration, but during...

[dice2012]

I'm going to Marin to visit some family for Christmas; my girlfriend is coming out afterwards, and we are looking for stuff to do. Wanted to put a feeler out to see if anything is going on around there...

[88_325]

Just got this car and the shifter is sloppy, loose, etc ... looking to put in a DSSR + short shifter to help out. I've found a few chassis mount short shifters I like but I'm unsure of the DSSR ... which...

[88Sedan]

Anyone have a brake master cylinder reservoir from an automatic car that they would let go for cheap?...

[Ljhnh75]

And so it begins…
Time for another m6x swap, it seems like these swaps are rarely happening these days, swap specific parts are becoming far harder to find, and OE stuff is getting more expensive...

[yusuf325]

Hi everyone,

I'm looking to connect with US-Spec E30 325i owners and enthusiasts who are familiar with ETK / VIN build data.

I have a factory-original 325i with a specific factory...

[Ra1994gh]

So after engine rebuild M20B20 from 87-89, new piston ring set, new bearing set for both rod and main bearings (brand Kolbenschmidt Standard sizes), the head was rebuilt at a professional shop and parts...

[hoveringuy]

I've gone down the 8HP45 rabbit hole and purchased one...

One of the nice things about having the N52 is that the swap should be mechanically trivial; anything from an N55 or N20 engine is...

[benz-tech]

I acquired an 07 donor car. Before I put this project in full motion, I’m hoping to get some answers on some possible non-starter issues.
1. This seems like the most difficult one. Factory catalysts...

[2002jm]

Most likely this has been mentioned before, but I think all the old timers and the new people should come back to R3V and forget about FB and
other on-line so called forums:). I know, everyone...

[marshallnoise]

marshallnoise's editor's note: This was originally posted in a couple places across the web but the pictures had died and it was not overly useful without the images. I took the time to hunt the photographs...