31 results in 0.0231 seconds.
-
R3v legends
Where are the r3v legends as well as the dumbfucks of r3v IE 5hoes haha I know we are older and such but I do miss the r3v of what seems like a very distant memory now. -
M20 distributor limitations and timing advance effect on the spark
does anyone know what is a design gap between distributor rotor and cap posts for each cyl when rotor is just above it? I roughly measured both and it's about 2mm. Basically what I see with my cam at...Last edited by zaq123; 11-11-2026, 06:50 AM. -
m3anderings
Hey R3V-
Sometimes life gives you lemons, and sometimes life presents you with an opportunity to buy the car of your dreams. No McLaren, Porsche, or Lamborghini has ever piqued my interest...Last edited by AWDBOB; 03-10-2026, 07:21 PM. -
Schrick 284/272 timing
I just installed a Schrick 284/272 and set it to what I think is supposed to be the TDC center position based on the German catalog. The #1 intake valve is open 2.2 mm and the #1 exhaust is open 1.7... -
8mm Hub-Centric Spacers – 57.1mm CB + Extended Lug Bolts. Any Recommendations?
I've been searching for 8mm hub-centric spacers with a lip (I believe that's what they're called), along with extended lug bolts, in a 57.1mm centre bore.
I'm having a hard time finding them,... -
m20 hose kit
Is there a go-to supplier for a complete M20 hose kit? I’m looking to replace all the rubber hoses under the hood and would prefer to get everything from one vendor rather than sourcing each piece ... -
Looking to buy right side rear window
I have a left hand drive e30 touring and need to buy the right rear (boot area) rear window. I believe the part number is 51361947264. Does anyone know of one for sale? -
FS: Porsche 944 Brake Booster and E32 Master Cylinder
I have a new in box Porsche 944 Brake Booster (ATE 300083) and E32 Master Cylinder (ATE 34311156643). Bought from FCP Euro for my S52 swap, but ended up going with a different booster setup.
... -
m20 10:1 2.9L stroker compression test results
Ok to start of: the gauge is verified with an accurate pressure gauge and they line up perfectly after 50psi (comp. gauge is 300psi so less resolution than accurate test gauge). schreder valve is located...Last edited by zaq123; 11-09-2026, 08:10 AM. -
Bring a Trailer Auctions, E30 edition
2025 List: 174 E30s sold (4 more than last year. Just a +3% increase)
Average of E30s, not including M3s $19,126 (-13% YoY)
Average price, by model:
M3 (24) = $74,154...Last edited by 2mAn; 01-02-2026, 09:09 AM. -
fender liners, engine hood, sport seats, rear seat w/ head rest/pass through
Looking to sell - local pickup in San Diego
drivers side and passenger side fender liners in good condition $65 for both
white engine hood with all brackets and hardware including... -
Bought a POS, this is R3Vs fault
I almost bought something fancy and expensive, then the sellers check "didnt clear," so to speak but luckily I had already spent a little time with the POS and was smitten with her charm......Last edited by 2mAn; 08-28-2025, 03:01 PM. -
BMW commitment to Classic Group parts
Since I acquired my 1990 325i in 2017, I have seen an enormous number of parts become NLA from BMW. This includes many trim parts such as the rear windows, rear window seals, carpeting and dash, as well...
-
Wiesmann hardtop missing plates
Looking for a response from people who own, have owned, or otherwise have direct knowledge of the Wiesmann hardtop. I purchased and just installed a used one on my '91 vert. But when it is bolted down,... -
M20B27 with Getrag 260 for sale
I have a freshly pulled B27 with a getrag 260 for sale. Both have roughly 250k miles but still run great. I have videos of it running just before it was pulled. I'm doing an engine swap so I no longer...
