If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Announcement
Collapse
No announcement yet.
From knowing nothing to having a Thunderbird supercharger on an m20b27i
Also, I think NA guys get 240chp out of a m20b28 relatively routinely. So I must be able to do that well. I would think.
And Will, I'm going to ebay now...
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
True dat. I really want my whole car to retain that OE drivability. I want to get in, start it, and drive without any bs.
I'm trying to find a good spot for the external heat exchanger (hood scoop looked terrible, just terrible). So I was thinking about putting the 6x18x1.5" one next to the a/c condenser. There's almost enough room. I also thought of stacking two a/c condensers and using one for the intercooler, but I thought they would affect each other's efficiency. Dammit, I want ideal! Why can't ideal be my friend?
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
I think I'm gonna stack the a/c condensers and use one of them for the intercooler. 3/4 of the year, I don't use a/c anyway. And when I'm using a/c, I'm probably not gonna be beating on it (the car...). So, how should I stack them?
Intercooler first,
pros:
coolest air for intercooler
increased power
increased detonation protection
cons:
Greatly decreases the efficiency of the a/c whenever the a/c is on
A/c condenser first,
pros:
coolest a/c for all occasions
cons:
less intercooling on the hottest days (only when a/c is on)
increased detonation risk (only when a/c is on)
less power in the summer (only when a/c is on)
If the a/c is first, then it would be keeping the intercooler from cooling as well when a/c is on. But, when I want to have strong intercooling, I can just turn off the a/c and in 20-30 seconds, full power intercooling available. That's the solution I think. Thoughts?
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
I would first see how you intercooler cools, get some numbers of your IATs after its all hooked up and go from there with A/C. That said, I would consider running an electric fan(automotive, no more computer fans please :)) with a higher cfm if you decide to stack a/c and you intercooler.
Get some more baseline numbers and once you have everything record what you get after. Including A/c vent temps and such.
AC condensers are designed to cool gas, not liquid. A heat exchanger designed for liquid may be more efficient. Since you're on a budget, maybe a junkyard/craigslist radiator from a small car?
Now I have to use the computer fans just to prove that they'll work. Damn youuuuuuu!!!!!
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
AC condensers are designed to cool gas, not liquid. A heat exchanger designed for liquid may be more efficient. Since you're on a budget, maybe a junkyard/craigslist radiator from a small car?
Yeah, I'm just gonna start out with the computer radiator (koolance) and see what it does. Then upgrade if needed. The a/c condenser is just bigger than the Koolance one.
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
Let me preface this by saying I've never tried this before, but I don't see any way you could possibly, physically, within the laws of science, use an A/C condenser as an IC. The lines running in to a condenser are 1/2" and designed to carry liquid, not gas. Most ICs have 2" inlets, sometimes 3". You cannot physically force enough air through a 1/2" condenser to make your motor run, it's far too restrictive. How big is the outlet on you SC? How could you possibly neck it down to 1/2"?
No, but whatever I do will have to be some crazy thing made of jy parts.
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
Let me preface this by saying I've never tried this before, but I don't see any way you could possibly, physically, within the laws of science, use an A/C condenser as an IC. The lines running in to a condenser are 1/2" and designed to carry liquid, not gas. Most ICs have 2" inlets, sometimes 3". You cannot physically force enough air through a 1/2" condenser to make your motor run, it's far too restrictive. How big is the outlet on you SC? How could you possibly neck it down to 1/2"?
You just don't know exactly what I'm doing. Look up "water to air intercooler". Then put a shit load of poetic license on it and that's what I'm attempting.
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
So I replaced all 12 of my rockers today. There is a reason. They were all some kind of aftermarket rockers that I took off of a very fresh AMC head that I got at the pull a part. Long story short, the new AMC head was murdered by the installer. He used a sledge hammer to beat the rocker shafts in to submission. Irrrrrrregardless, I used the nice brand new rockers on the head that I rebuilt for the yard motor. Then I broke this one last week and I decided to do a comparison of the ones I have. So, here's a pic for posterity. Does anyone want to guess which type I broke?
Attached Files
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
One of them is OE bmw, one is the redesign by Febi, and one is an aftermarket piece of dog shit.
Originally posted by Andy.B
Whenever I am about to make a particularly questionable decision regarding a worryingly cheap diy solution, I just ask myself, "What would Ether-D do?"
Comment