Announcement

Collapse
No announcement yet.

M20B27 with 173 ecu

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #31

    Comment


      #32
      Originally posted by Georgiyk View Post

      So is there another head that’s identical to the 200 head that can be swapped out or how does it work do you just replace springs or what.
      you can replace springs or put a head with the springs already installed.

      the 200 eta is not much chop for anything, for a performance engine people do a 731 head from a m20b23 or m20b20 which has the same combustion chamber so it matches up with the pistons proerly but slighty larger ports. or they just use the 885 head from m20b25 which while not ideal still is an improvment
      89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

      new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

      Comment


        #33
        Originally posted by Georgiyk View Post

        Bro shut up no one cares about your 1/4 mile runs
        RUDE.

        Thats the best way to know if you've made your car better or worse... Id also suggest doing a dyno run, but a 1/4 mile run is more fun.
        Simon
        Current Cars:
        -1999 996.1 911 4/98 3.8L 6-Speed, 21st Century Beetle

        Make R3V Great Again -2020

        Comment


          #34
          Originally posted by digger View Post

          you can replace springs or put a head with the springs already installed.

          the 200 eta is not much chop for anything, for a performance engine people do a 731 head from a m20b23 or m20b20 which has the same combustion chamber so it matches up with the pistons proerly but slighty larger ports. or they just use the 885 head from m20b25 which while not ideal still is an improvment
          I have the 885 head and it doesn’t fit because the eta and b25 have different pistons

          Comment


            #35
            Originally posted by Georgiyk View Post

            I have the 885 head and it doesn’t fit because the eta and b25 have different pistons
            it fits fine, the pistons arent matched to the chamber correctly but it installs fine but its just not ideal compared to a proper 2.7
            89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...

            new build thread http://www.r3vlimited.com/board/showthread.php?t=317505

            Comment


              #36
              Soooo... what sort of noises does it make abut 5500 rpm?

              t
              this is fun.
              now, sometimes I just mess with people. It's more entertaining that way. george graves

              Comment


                #37
                Originally posted by TobyB View Post
                Soooo... what sort of noises does it make abut 5500 rpm?

                t
                this is fun.
                BRO

                Redline is 6500+ and it needs to hit AT LEAST 6000 to really take advantage of this setup

                Simon
                Current Cars:
                -1999 996.1 911 4/98 3.8L 6-Speed, 21st Century Beetle

                Make R3V Great Again -2020

                Comment


                  #38
                  Originally posted by TobyB View Post
                  Soooo... what sort of noises does it make abut 5500 rpm?

                  t
                  this is fun.
                  Doesn’t make any noises

                  Comment


                    #39
                    Originally posted by Georgiyk View Post

                    Doesn’t make any noises
                    What noise did it make before it stopped making noises?

                    Comment


                      #40
                      Originally posted by roguetoaster View Post

                      What noise did it make before it stopped making noises?
                      Never made any noises

                      Comment


                        #41
                        Originally posted by Georgiyk View Post

                        Doesn’t make any noises


                        >disappoint<



                        t
                        now, sometimes I just mess with people. It's more entertaining that way. george graves

                        Comment

                        Working...
                        X