E30 Mtech-2 - Alpin-weiss 2 - M50B25 - E30 M3 5LUG

[Mazi!]

I have two short ones, audio isn't great on either but they get the point across.

https://youtu.be/pbN-fvVJhmE

https://youtu.be/YZYiM0lUnTg

After turbo with external mic under the hood:

https://youtu.be/tJzrilZ7d7Q

Nice!

what turbine housing are you running on the S257 SX-E ?

[Northern]

Nice!

what turbine housing are you running on the S257 SX-E ?

I'm using a T3 to 3" Vband 0.82 A/R housing from AGP Turbo. I already had bought the T3 manifold or else I would've used the normal Borg Warner 0.8x AR T4 housing.
Might consider a smaller A/R if I had a low comp motor.

[Mazi!]

I went to a test drive after the M50 swap and the differntial lock slipped in every turn....


So i bougt a refreshment set from racingdiffs,, ordered the stage 1 kit with 40% lock




Diff is out!




Cleaned it




Everything apart




This is ready for blasting




Lock dissasembled




Here are the old LSD discs,, very worn and bad condition




New discs






Lock ready




Painted the housing










Stuff from blasting




2layers of clearcoat






Now its ready for install








But im not going to install it now because upcoming is full 5Lug swap and a real 5lug swap! from E30 ///M3 not some e36 shit :D

[Mazi!]

I just sold the borbet a wheels because im going to do a E30 M3 5lug swap $$$$$$$$$$$$$$$$$$$$$$$$$$$$ :bawl:

it is currently sitting on some trash wheels




Bought E30 M3 version of KW Variant 1












Also

E30 M3 rear hubs
E30 M3 rear brake dust covers
E30 M3 rear brake caliper brackets
E30 M3 rear brake pads and sensor
and some stuff for the handbrake








95a poly bushing kit from Garagistic




installed the diff bushing










As can be seen i got loats of the parts that i need already but im still buying and searching for many other parts before i can finish that 5 lug swap.

[moatilliatta]

Nice! minus the garagistic bushings.

Make sure to put 12.9 hardware in those uprights.

[ZEKTI]

Fantastic thread! So cool that you're also building this in Iceland. Those KWs are amazing.

[Mkcustoms88]

Beautiful build so far, looks like you have access to a garage when you need it makes things easier, keep up the great work

[Mkcustoms88]

Nice! minus the garagistic bushings.

Make sure to put 12.9 hardware in those uprights.

What’s the deal with the garagistic bushings if I may ask?

[Glaede]

That's an awesome upgrade! The proper way to do 5-lug! :-)

[Mazi!]

Got a little package from USA today

Used E30 M3 brakecalipers and brackets both sides at front.. had to buy them used because they are discontinued from BMW
they were very expensive and hard to find and definitely need a full rebuild and sandblasting










Still waiting for more parts :)

[Mazi!]

Package day today!!




E30 M3 ATE brake calipers both sides rear
E30 M3 Zimmermann rear brake discs
Brakepad wear sensor front
Hjólalegur b/m að aft. orginal
Handbrake shoes
Handbrake spring set
Handbrake tensioners
both handbrake cables
both rear swaybar end links
all rear axle boots
Brakepipe set
Blower motor
















and this heavy package from USA with both rear control arms and axle shafts












Ireland Engineering brake hoses




now i got almost everything that i need for that 5lug swap

still need to buy
Brakepads front
brakediscs front
front wheelbearing
Dust shields at front.

[AWDBOB]

Nice- that's a dreamboat setup. I had a setup almost completed but never followed through with installing it. With the E30M3 KW Coilovers available with ackerman arms, it makes the conversion quite tempting. The main obstacle are brakes and dust shields. Rear hubs are quite pricey, too, but are at least still available. I remember just a few years ago one could buy rebuilt M3 calipers on Rockauto for $40-50 a pop. Oh, how times have changed.

[Mazi!]

Just got some more stuff


e30 m3 front dust covers
e30 m3 front swaybar ends
e30 m3 front brake clips
e30 control arm brackets
and some bolts and stuff..





New pistons and rubbers for e30 m3 front calipers




Im going to sandblast the front brake calipers and paint them with that set,,, i got the idea from Sreten at m539 restorations on youtube
(silvergrey color)




Some more new stuff....
new speedsensor, speedsensor plug housing, swaybar stuff.




Bought the rear swaybar used (er smá ryðguð,, (its a little rusty im going to paint it) and e32 750 mastercylender




Front control arm bushings installed in brackets




new speedsensor installed




bought the speedsensor plug housing new because its cracked and old..




Cleaned the rear control arms before disassemble




Rear control arms disassembled




Dropped the subframe out,,, im not going to use anything on that picture (only the subframe itself)







Took the axle driveshafts apart, painted them and changed the grease and rubber boots










One side ready

[Mazi!]

Both axle driveshafts ready






Burning out the old subframe bushings










Ready for sandblasting




blasted










Garagistic reinforcement set














Subframe painted and ready






Ready for install




almost done at rear,,, KW Variant 1 and everything new!!




Front hubs and brake parts




E30 M3 front calipers blasted




Painted




and ready with new pistons, rubbers...




Ready at front




Installing e32 750 master cylender




e32 750 mastercylender installed




now its almost finished,, still have to bleed the brakes, and do some more small things,, AND find some 5x120 wheels...

[moatilliatta]

Looking good! I came across these 5x120 wheels today :p