Announcement

Collapse
No announcement yet.

Kamotors E30-Turbo to ITB M20

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    OK so I believe MAT correction fixed the lean problem. It was seeing 140degree air after sitting for around 15minutes. Now it ran at 13.5AFR at idle when heatsoaked instead of 16afr.

    I increased the correction percent by 7% and it seemed to do the job.


    7speedshop.com

    Comment


      Had an awesome day at Auto-X today. Car ran flawless and had tons of sideways moments.


      7speedshop.com

      Comment


        I wish I had your problem. I'm bored because I have no monies!

        Car looks great! I would love a turbo e30 one day.

        Comment


          why not incorporate the RSM studs with the bracket?
          2014 Alpine White 335i MSport
          (Daily Driver)
          Full Mperformance Aero

          2007 Black Sapphire Metallic E92 335i (6MT)
          KW V2 Coilovers
          VRSF Catless Downpipes

          Comment


            this project is looking great. I especially like that your wheel/tire/suspension setup is for max functionality and the tires have a lot of meat on them.
            Stage rally/rallycross e30 build/competition journal
            Track/street e21 build
            visit Condor Speed Shop
            visit Motorsport Hardware



            [FONT="Franklin Gothic Medium"] 1985 318i/M50 Rally Car - 1988 Porsche 924S - 2005 Sequoia tow pig - 2018 GTI

            Comment


              so I re grounded the wire at the shock tower and I'm still getting the code. I'm guessing that the harness normally grounds at the ECU correct? so I'm guessing the problem is with the heater power and I need to get it 12v of pow


              7speedshop.com

              Comment


                Getting spark blowout at 17psi and can only make about 15.5 in 3rd gear,I think my wastegate is leaking a bit.


                7speedshop.com

                Comment


                  http://www.youtube.com/watch?v=Cb1AtOuTrIAthe videos not too good but it shows the hesitation in 4th gear going 0-100.


                  7speedshop.com

                  Comment


                    That looks killer, in for more pics of the finished product...


                    Project log -- DIRTY 30

                    2.7i * Megasquirt tuned * E85 powered

                    Comment


                      apron is needed now

                      Comment


                        More aggressive skirts, ACS rear valance, no mudflaps, and more wheel/less tire. My car was kinda similar at one point. :D

                        Comment


                          Originally posted by Ian Bowers View Post
                          More aggressive skirts, ACS rear valance, no mudflaps, and more wheel/less tire. My car was kinda similar at one point. :D
                          I'll get there eventually, really want some big wheels now.


                          7speedshop.com

                          Comment


                            Yep some baller wheels will complete your car. Quick progress!
                            1987 325i-M60b44 swap

                            Comment


                              I think my turbo is dead my drain is still good, I have vacuum to the turbo inlet, a nd the feed has what I measured as a 1.5mm restrictor. It smokes like crazy at idle but not at anything above idle untill I let off and go into overrun and then it smokes quite a bit, enough to make cars behind me angry and have them go around me.

                              I'm first going to get a new oil pan and have a 3/4 fitting welded to it and run a bigger drain and if it still smokes I'll put the car out of commission for the season and save up a for a new turbo


                              7speedshop.com

                              Comment


                                Great idea


                                M20B28 Turbo

                                My Build Thread

                                http://www.r3vlimited.com/board/showthread.php?t=255839

                                Comment

                                Working...
                                X