Kamotors E30-Turbo to ITB M20

[ForcedFirebird]

All I hear is pure sex when I listen to those videos, surge..??lol

Sometimes you hear it with a bypass even :)

https://www.youtube.com/watch?v=LPxpliUiNwI

[e30 gangsta]

Sometimes you hear it with a bypass even :)

https://www.youtube.com/watch?v=LPxpliUiNwI

I should paint my bay black, It looks so clean lol

[kamotors]

hartge rep rear valance from poland, less than 4lbs, perfect fit and excellent finish? win-win

sits lower and wider, just need to finish up a few things and paint and mount




but of course I have to modify it just for fun. making a rivet-on exhaust delete panel
20151028_121516 by kamotors@y, on Flickr

[Bimmer_man]

nice hartge rep. Where did you get it?

[Bearmw]

Looks good from that angle.

[kamotors]

some photos from the weekend
[IMG]E30tyleredit by kamotors@y, on Flickr[/IMG]
e30tyler by kamotors@y, on Flickr

[kamotors]

some photos from the weekend
[IMG]E30tyleredit by kamotors@y, on Flickr[/IMG]
e30tyler by kamotors@y, on Flickr

[Blake B]

Where'd you get the DTM wiper?

[kamotors]

So took off rear wheels to mount the hartge valance and discovered both rear wheel spacers broke. So stay away from dsx brand

Sent from my SM-N920T using Tapatalk

[LJ851]

How thick is that spacer?

See how little meat there is where the spacer comes back over the top of the center of the hub? Writing off the entire line of spacers because one of them is poorly designed seems excessive.


Any spacer that thin that is hub centric would have similar strength issues, the wall thickness is just gets too thin.

[kamotors]

How thick is that spacer?

See how little meat there is where the spacer comes back over the top of the center of the hub? Writing off the entire line of spacers because one of them is poorly designed seems excessive.


Any spacer that thin that is hub centric would have similar strength issues, the wall thickness is just gets too thin.

10mm that are sold specifically as e30 wheel spacers, but clearly don't fit the rear, most brands like h&r don't put a lip on the 10mm spacers. So I guess just avoid there 10mm spacers, they were likely bottomed out on the center hub and not even making contact with rotor mounting surface so repeated tightening of the wheel likely broke them.

Sent from my SM-N920T using Tapatalk

[kamotors]

winter plans-
Install my new fx400 clutch
paint the hartge rear valance
finish exhaust setup to exit at the rear
800lb rear springs
Koni rear shocks
new disks
renewed rear calipers
Ultra wide rear flares(maybe)
build a decklid from either FG of CF.
Mount my 2gallon Methanol tank less janky


Already started ducting the FMIC better
20151023_160533 by kamotors@y, on Flickr

and hiding my front poke a bit
20151023_160553 by kamotors@y, on Flickr

[Coyote_ar]

10mm spacers are really the problem. they are too thin so theres not enough material to clear the hub.

[kamotors]

New clutch in today, everything went super smooth. Drives nice, soft pedal feel and almost no chatter.


Still need to make a finished exhaust setup.

Sent from my SM-N920T using Tapatalk

[efficient]

Dang you tear this car apart pretty fast