Kamotors E30-Turbo to ITB M20

[iwantspeed]

Awesome results congrats!

[ahrensNW]

Merp. I have more turbo wants than turbo moneys as a result of those sheets.

[kamotors]

[Wschnitz]

Volume on that is a little extreme lol

[stanhayward]

Nice and linear power band. Also 400whp isn't too shabby ;) Congrats!

[grinchxvx]

(Real pics and videos later)

The results are in! First dyno run destroyed my tires as the car was tied down to the point of tucking rim and It was bottomed out on body of car. I had to jack the coil overs all the way up, which isn't too fun on a dyno with wheels on the car.

All testing was done on a Mustang dyno, with only minor fueling changes from the base tune I supply with my kit.

So first real pull 330whp at 13-14psi

Second pull made 396whp at 16psi

And 3rd pull made 401whp and 370trq at 17psi.

I'll be going back with my tune for meth and maybe some more boost.



Sent from my SM-N920T using Tapatalk

good shit, thats easily 400whp+ on a dynojet which is pretty much the standard. what does your car weight like 2500lbs?

[kamotors]

good shit, thats easily 400whp+ on a dynojet which is pretty much the standard. what does your car weight like 2500lbs?

Around 2600

Sent from my SM-N920T using Tapatalk

[88SuperETABD]

Nice Kameron. I hope you gave me that second tune @ 16 psi :) good numbers! Happy to see this. I have a feeling my motor will be 400+ then with your tune.
Crazy 2 psi jumped 60whp. What were torque figures for 330 and 2nd pull. Did you mess with timing between 1 and 2?


Sent from my iPhone using Tapatalk

[kamotors]

Nice Kameron. I hope you gave me that second tune @ 16 psi :) good numbers! Happy to see this. I have a feeling my motor will be 400+ then with your tune.
Crazy 2 psi jumped 60whp. What were torque figures for 330 and 2nd pull. Did you mess with timing between 1 and 2?


Sent from my iPhone using Tapatalk

no timing adjustments or fuel changes were made between any runs. I made all the changes after 4th run to go back and get dyno'd again. I'm guessing it was in its efficiency range better or something.

[IronFreak]

So none of these runs where done on meth? Or did I read that wrong?

[kamotors]

My wheels will be for sale around the end of the month, who wants them?

[Bimmer_man]

So none of these runs where done on meth? Or did I read that wrong?

He always is on method cause of the grade of fuel we have in Nevada. Too many additives and with high boost I think it can cause damage. I'm sure I'll be corrected if I'm wrong.

[kamotors]

He always is on method cause of the grade of fuel we have in Nevada. Too many additives and with high boost I think it can cause damage. I'm sure I'll be corrected if I'm wrong.

Meth was used but i left the car in a running rich untuned state with only my base tune timing map. I expect at least another 30-40whp on my new tune. And nothing to do with additives. Water meth gives benefits of cooling as well as greater detonation resistance. So you can either run higher boost, more ignition timing and a leaner afr.

During that dyno I was only using around 14degrees of timing in boost, and around 11.2afr, since the dyno chart I've upped timing to 19 degrees and corrected afr to 11.8. Although the guy running the dyno said he prefers around 12.0 with meth. I want to be a bit on the safe side.

Sent from my SM-N920T using Tapatalk

[kamotors]

Sent from my SM-N920T using Tapatalk

[kamotors]

Sent from my SM-N920T using Tapatalk