S38 turbo e30 Hartge H35-24 H bomb

[e30m3s54turbo]

I bought a few euro kick panels with headlight aim control parts. It looks rough to me. I think I need to buy a new 3D kick panels.

[e30m3s54turbo]

I been bouncing back and forth on my headlights with euro adjustables .and cluster wiring and sensors.
I got my sensors on my $50 oil cap filter. I wired up to see digital read out on my costume cluster.

[e30m3s54turbo]

Here is a better pic. I’m going to add a other thing to cluster soon.

[moatilliatta]

They have carbon kick panels, You could just vinyl wrap or flock them.

Does the oil temp sensor read before or after oil cooler?

[e30m3s54turbo]

They have carbon kick panels, You could just vinyl wrap or flock them.

Does the oil temp sensor read before or after oil cooler?

One oil temp is on top of oil cap filter. Where would be the best to place it?

[e30m3s54turbo]

I ordered a 8000k cluster chip. The one ordered from eBay was to short to fit. It a e28 m5 cluster chip. I ordered two from E30 Cluster. It fit perfect…

[e30austin]

i've ran a few of those eBay coding plugs. you need to install the chip with a pair of needle nose pliers. they work just fine. i never wasted the time trying to modify a plastic e30 coding plug housing to work with the e28 coding plug. seemed like more work than it was worth, at the time.

[e30m3s54turbo]

i've ran a few of those eBay coding plugs. you need to install the chip with a pair of needle nose pliers. they work just fine. i never wasted the time trying to modify a plastic e30 coding plug housing to work with the e28 coding plug. seemed like more work than it was worth, at the time.

Thanks, Austin for input.
Yes I bought eBay ones for e28 m5 8k chip. It was short and pin needles. I been watching your build on the s14 2.5 👍
I went back to to e30 Cluster site and order the 6 cylinder 8k chip $28 bucks. It fit perfect like the stock e30 cluster chip. The costume cluster was cheep to buy $450.

[e30m3s54turbo]

I ordered a new part for my custom cluster.

[e30m3s54turbo]

I finally finished up installing my rpm tach light on my cluster. I set up tack to go up 7,500 K.

[downforce22]

I finally finished up installing my rpm tach light on my cluster. I set up tack to go up 7,500 K.

how hard was this to do? Where did you get the parts? The innovative goods ones seemed a bit pricey for $160

[e30m3s54turbo]

how hard was this to do? Where did you get the parts? The innovative goods ones seemed a bit pricey for $160

.
I bought my from My Classic Parts. It was easy to install. The price is $170.

[e30m3s54turbo]

I’m finally installed my custom cluster and tucked some wires on bottom of it. I still need to order a new kick panel.
one of parts came in today. My new 44mm Tial waste gate.

[e30m3s54turbo]

I’m going to install the springs on 44mm waste gate at 15 psi. I can always increase more with a boost controller.

[Northern]

If you do a standalone electronic boost controller down the road, I can't recommend the GFB G-Force III enough.
Not quite as convenient/adjustable as having it controlled by the ECU though (which I assume you would rather do, given the standalone.)