Bronzit E30 - OBDII S52 shaved bay - weekend/autox toy - Journey

[Sh3rpak!ng]

So this whole oil pan repair has become quite the project.

It has snowballed into replacing the power steering pump, fuel lines, engine and trans mounts.

Ive known my power steering was dying for a long time. Its the second used zf pump. New ones are NLA. Last time I tried to buy one there were no options. This time I stumbled upon a new AAE unit offered through bimmerworld, so I'll give it a shot. I also saw rockauto offers rebuilt units.



Sent from my SM-S931U using Tapatalk

[Northern]

Ill report back with some review.

I also have ball jointed control arms. But running a normal guibo, and 5lb flywheel (clutch masters small twin disc).

Sounds great. Turbo/WG/downpipe is all super tight, so any info you can gather on position delta would be huge.

Forgot to include I'm on a cheap-o FX racing ""stage 3"" single mass/6-puck/Sachs HD setup. Lighter than an M20 flywheel but nowhere near 5lbs.

[Chilezen]

and 5lb flywheel (clutch masters small twin disc).

5lb flywheel, and what's the clutch pack weigh? I bought the lightweight kit from UUC and I was warned that the transmission would rattle due to less inertia, and they were right, the damn thing rattles every day once the car warms up. They said to fill up half the trans with a quart of thicker oil (I don't remember which exactly) to reduce the rattle. It's still pretty annoying. But it will stop once I press the clutch in. Kind of makes me think the TO bearing is junk.

So I'm wondering, do you also have that problem with a lightweight setup? Transmission rattle when the car is idling?

[Sh3rpak!ng]

Sounds great. Turbo/WG/downpipe is all super tight, so any info you can gather on position delta would be huge.

Forgot to include I'm on a cheap-o FX racing ""stage 3"" single mass/6-puck/Sachs HD setup. Lighter than an M20 flywheel but nowhere near 5lbs.

akg mounts shifted the engine about 1/2" to the passenger side

Sent from my SM-S931U using Tapatalk

[Sh3rpak!ng]

5lb flywheel, and what's the clutch pack weigh? I bought the lightweight kit from UUC and I was warned that the transmission would rattle due to less inertia, and they were right, the damn thing rattles every day once the car warms up. They said to fill up half the trans with a quart of thicker oil (I don't remember which exactly) to reduce the rattle. It's still pretty annoying. But it will stop once I press the clutch in. Kind of makes me think the TO bearing is junk.

So I'm wondering, do you also have that problem with a lightweight setup? Transmission rattle when the car is idling?

The whole unit is ~18lbs. And yes it rattles and vibrates like a mofo. Pushing the clutch in also quiets. Doesn't sound like anything wrong with your setup, especially if you don't notice any performance issues. Ive literally had a few people warn me that "my car is broken" Ha!

Sent from my SM-S931U using Tapatalk

[Chilezen]

akg mounts shifted the engine about 1/2" to the passenger side

Well for most swaps, that means a little extra room for a brake booster.
You have a chassis-mounted shifter, right? Does that setup have enough play to allow for the engine's shift? (pun intended)

[Sh3rpak!ng]

Well for most swaps, that means a little extra room for a brake booster.
You have a chassis-mounted shifter, right? Does that setup have enough play to allow for the engine's shift? (pun intended)

Yea shifter will be fine. Ill probably have to adjust it though.

Sent from my SM-S931U using Tapatalk