what is the max length of a single hose required? i dont recall having issues but need to see where i ordered from
Announcement
Collapse
No announcement yet.
Replacing fuel hoses question
Collapse
X
-
89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
-
Originally posted by digger View Postwhat is the max length of a single hose required? i dont recall having issues but need to see where i ordered from'70 911s | '72 2002 | '88 M5 | '89 330is | '89 M3 | '95 911 | '02 M5 | '04 RR HSE
Comment
-
Originally posted by e30austin View Post
not sure if i 100% understand what you are saying, but the minimum length BMW will sell you, is a single meter, and they told me it comes as a 5 meter spool. hell, they probably would sell you more, should you want it. i know it used to be sold in bulk through IMC, a distributor here in the states, as a 5 meter spool. FWIW89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by e30austin View Post
i don't know, i don't buy from online vendors. that being said, if you actually read what i posted, i specifically request 5m, UN CUT, from my local dealer, and i have not had an issue..........
Just a quick update, I have called ECS and FCP Euro, they all sell it by 1 meter piece and would not be able to send me one continuous 2 meter piece. Also, I have called a few local BMW dealers and they do not have it in stock, when I asked if they would be able to order it as one continuous 2 meter piece they were not sure of knew how to even find out. ECS or FCP Euro sell 1 meter anywhere between $36-39 . A few local dealers quoted me anywhere between $75-82 for 1 meter.
Comment
-
Originally posted by varg View PostI have never had any issues with Gates barricade 5/16" hose, and there are lines on my car that have been there since 2015. The car is turbocharged so the under hood temps and fuel pressures are higher than they are for NA guys, FWIW.Originally posted by priapismMy girl don't know shit, but she bakes a mean cupcake.Originally posted by shamesonUsually it's best not to know how much money you have into your e30
Comment
-
i recall seeing a thread stating there was several part numbers for OE hose from BMW. Does anyone else recall this?89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
As far as I can tell, none of the OEM sources sell pieces of the 8mm ID high pressure furl hose in lengths other than 1m. I ordered 2m from both ECS and Tischer, and they both sent me two 1m lengths which I had to return. So, I did what others have done and ordered some Gates 27335 (27445 is also fine). IIRC the return hose that runs along the top of the fuel tank is like 1.3m, so a longer length is needed there. I am going to do all of the hoses on the car so I just got 20ft (which is way more than needed, but I have another car that I can use some on).
Comment
-
Originally posted by bmwman91 View PostAs far as I can tell, none of the OEM sources sell pieces of the 8mm ID high pressure furl hose in lengths other than 1m. I ordered 2m from both ECS and Tischer, and they both sent me two 1m lengths which I had to return. So, I did what others have done and ordered some Gates 27335 (27445 is also fine). IIRC the return hose that runs along the top of the fuel tank is like 1.3m, so a longer length is needed there. I am going to do all of the hoses on the car so I just got 20ft (which is way more than needed, but I have another car that I can use some on).
P/N 27340 also works for the 5/16" line.
Comment
-
Originally posted by digger View Posti recall seeing a thread stating there was several part numbers for OE hose from BMW. Does anyone else recall this?
13 31 1 272 731 is the part number for the blue label "Eco", 8x13 hose
i like the green stripe hose, personally. nothing wrong with either, though.'70 911s | '72 2002 | '88 M5 | '89 330is | '89 M3 | '95 911 | '02 M5 | '04 RR HSE
- Likes 1
Comment
-
Originally posted by e30austin View Post
16 12 1 180 409 is the part number for the green stripe, 8x13 hose
13 31 1 272 731 is the part number for the blue label "Eco", 8x13 hose
i like the green stripe hose, personally. nothing wrong with either, though.89 E30 325is Lachs Silber - currently M20B31, M20B33 in the works, stroked to the hilt...
new build thread http://www.r3vlimited.com/board/showthread.php?t=317505
Comment
-
Originally posted by digger View Post
is 13537563456 for ethanol based fuels?
i have been using only the green stripe 409 hose or the blue S54 5 bar 456 hose for the last few years and have not had a single issue. good luck.Last edited by e30austin; 02-16-2025, 05:49 PM.'70 911s | '72 2002 | '88 M5 | '89 330is | '89 M3 | '95 911 | '02 M5 | '04 RR HSE
Comment
Comment