Official SoCal PARTS For Sale Thread

[DunDeal07]

Looking for late lower fender liner air with air duct. Both sides. PM me what you got!

[reelizmpro]

Bare 24v M52/S52 cylinder head for BMW 3 or 5 series 95-2000. Machine shop cleaned, tested and decked. Comes with valves and springs. $350




BMW E30 coilovers by German Engineering Front - 350 or 450 lb springs. Rear 650 lb Hypercoil springs with perches, hats and wrenches. $200 R3v price



Brand new in box, Nissens radiator for 91 BMW 318i/iS or 92-99 318i/iS/Ti or Z3 1.8/1.9 with 4 cylinder M42/M44 engine. Perfect radiator for BMW E30 with 24v swap. Comes with integrated expansion tank for a cleaner engine bay. $100


High quality Fiberglass E30 M3 front bumper to fit all BMW E30 84-91 with minor modification. All provisions for turn signals and lights. Direct fit on E30 M3. I contracted with a pro who reproduces bumper covers to have these made years ago. Not available anywhere. OEM quality $600




Used Borla stainless steel rear muffler for BMW E30 M3 88-91. Nice deep tone and lighter than stock. Bolt on installation. $300

Used 3 bolt BMW E36 driveshaft with guibo and new E30 Center support bearing. Joints are smooth. You need this driveshaft for swapping a 24v S50/S52 engine woth ZF transmission into your 84-91 3 series BMW. $200

[2mAn]

WTB: cluster clear surround

asking for a friend

[e30lyf]

WTB: driver side taillight for late model. please lmk what you got. thanks

[RSCue]

Selling a brand new in box VDO/Continental TR7412UB-OR Headunit with harnesses. I bought it for my car but ended up selling my e30. One of the only headunits with bluetooth that looks right in an e30. $140 picked up

Heres a link to it:

https://www.turnermotorsport.com/p-5...g1N32NPR01uKrg

PM’d

[DunDeal07]

WTB: 89 Sunroof inner slipstream wind deflector. Need from #7-13. Essentially the complete front part.


https://www.realoem.com/bmw/enUS/sho...diagId=54_0044

[krayzi[e]]

O'reilly and Autozone are not places to find E30 parts.

That clip is something you should buy Original BMW. There is an aftermarket version but in my experience the OEM part is worth the additional cost. You can buy it directly from Pacific BMW or give BMA Parts a call. The BMW part number is 63121378369. The current dealer retail price is $4.38.

thanks for the info. you're right, i should be looking into genuine BMW parts for replacement. but it looked like a universal piece ¯\_(ツ)_/¯

[WestCoastEta]

I'll take that fan shroud! Mine has a crack in it

[2mAn]

Brand New Corteco Differential Mount = $20
-Late Model lower dash trim = $20
-Interior Dome Light = $10
-Rear Diving Board Bumper Shocks, not drilled = $50
-Rear Diving Board Bumper Trim, with clips = $40
-Radiator Fan Shroud = $20
-E30 Lollipops = $20

[2mAn]

FS: SuperETA Instrument Cluster with rebuilt odometer gears

$100
Located in CA 90302, can ship at your cost
This was a good used cluster that needed gears. I replaced those and have been sitting on it for a while now. Its time to let it go.

[WestCoastEta]

I have a few things I need to clear out of the garage so I can afford new parts. In the off chance someone wants to trade, I'm looking for the following:

• E46 purple tag steering rack
• M20B25 parts for my stroker build: Intake Manifold, TB, AFM, FPR, Motronic 1.3 + harness, exhaust, etc. I basically need all the i parts except the head.
• Zender or Kamei side skirts
• Rear apron for euro cars
• Unfucked seats (Been eyeing the Corbeau GTS IIs)
• Nice undented hood, as well as both front fenders (must be Alpine White)
• Amplifier for an E39 touring without navigation (lol I know, doubtful)

Here's what I have (click here for photos):

Rear Eibach springs (5" long, 2.25" diameter, 700 lbs)
I put about 10 miles on them before deciding they weren't quite low enough for my tastes.
Eibach sells em for $63 each - I'd take $100 for both.

Koni yellow front inserts (8641 1021SPORT)
Never mounted, still in box.
$350 new, I'd take $275

Used JOM Coilovers
They're not good, but they'll get your car low. About 10k miles on them. One of the front struts appears to be blown.
$90

Front & rear diving boards with drilled shocks
Front bumper is dented but the shocks are good.
I have some trim as well, but threw some stuff away so it's not complete
$50

Door
Early coupe, drivers side. It has a large dent in the side.
$40

2 windows
One has a broken regulator-mount, but glass is good.
$45 for the good one, $20 for the other

2 early model valances
One is in good condition, the other is a bit dented up.
$75 each

Early-early model valance
This is for pre-1985 cars with the 2 piece valance.
$60

Dashboard
Was in good condition until I dented it in storage.
$120

US Grilles
One side has a break in the plastic.
$35 for the set

USDM sealed beam headlights
$40 for everything

NRG Quick release 2.5 with E30 Hub (also have an E46 hub)
$100 for the quick release, $90 for the hub, or $175 for both

Mtech-1 385mm steering wheel
Leather is worn out and there's some splitting at the top. The slip ring for the horn (32331152896) is missing.
$75

Meyle front strut mounts
New in box. They're $40 each from Pelican, asking $70 for the pair.

Early fog lights
These came off a 1984 325 with the 2 piece metal valance. I'm not sure if they are the same as the ones that came on the one piece valance (1985+)
$80

Power antenna
I don't know if this works
$30

Happy to send more photos upon request. Prices aren't firm, I'd really just like to clear out the garage and get some cash in my pocket. I will also consider trades for beer, 35mm film equipment, smog "help" with my 530i, alignment services, etc.

[MR 325]

O'reilly and Autozone are not places to find E30 parts.

That clip is something you should buy Original BMW. There is an aftermarket version but in my experience the OEM part is worth the additional cost. You can buy it directly from Pacific BMW or give BMA Parts a call. The BMW part number is 63121378369. The current dealer retail price is $4.38.

[krayzi[e]]

Hey guys,

looking for a single headlight fastener clip! like this

https://www.amazon.com/Madahu-Fastener-Clip-Headlight-Accessories/dp/B07Z9K1HPK/ref=sr_1_3?dchild=1&keywords=e30+headlight+fastener+clip&link_code=qs&qid=1587478755&sourceid=Mozilla-search&sr=8-3

if anyone has any laying around in the glendale/burank area i'll drop you a few bucks.

or if anyone knows the part number i can search at o'rellys / autozone bc i cant find them.

thank you!

[positiveions]

WTB clutch pedal for 5 speed conversion. If anyone has any something hit me up.

[Scallywagon]

https://www.r3vlimited.com/board/for...ot#post9918795
m20b25 with schmeidman long tubes for sale $600 hmu